Maytag MGR5875QDW Use and Care Guide - Page 19
Serf-Clean
View all Maytag MGR5875QDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 19 highlights
Serf-Clean Oven To set Self-Clean: - it is normal for parts of the oven to become hot during a - To prevent damage to oven door do not attempt to open the door when LOCK is displayed. • Avoid touching door, window or oven vent area during a clean cycle. , Do not use commercial oven cleaners on the oven finish or around any part of the oven. They will damage the finish o_ parts. The self-clean cycle uses above-normal cooking temperatures to automatically clean the oven interior. It is normal for flare-ups, smoking, or flaming to occur during cleaning if the oven is heavily soiled. It is better to clean the oven regularly rather than to wait until there is a heavy buildup of soil in the oven. During the cleaning process, the kitchen should be well ventilated to get rid of normal odors associated with cleaning. Before Se f-Cleaning 1. Turn off the oven light before cleaning. The oven light may burn out during the clean cycle. 2. Remove broiler pan, all pans, and oven racks from the oven. The oven racks will discolor and may not slide easily after a self-clean cycle if they are not removed. 3. Clean oven frame, door frame, area outside of gasket, and around the opening in the door gasket with a nonabrasive cleaner such as Bon Ami* or detergent and water. The self-cleaning process does not clean these areas. They should be cleaned to prevent soil from baking on during the clean cycle. (The gasket is the seal around the oven door and window.} 4. To preventda,eage, d onotclean or rub the gasket around the oven door. The gasket is designed to seal in heat during the clean cycle. ,_ _'___ __t_ 5. Wipe up excess grease or spillovers from the oven bottom. This prevents excessive smoking, flare-ups or flaming during the clean cycle. 6. Wipe up sugary and acidic spillovers such as sweet potatoes, tomato, or milk-based sauces. Porcelain enamel is acid-resistant, not acid-proof. The porcelain finish may discoior if acidic or sugary spiiis are not wiped up before a self-clean cycle. Note: Oven temperature must be below 400° F to program a clean cycle. 1. Close the oven door. 2. Press the Clean pad. ° CLEAN flashes. ° SET flashes in the display. (} Press the Autoset 0 pad. Autoset ° MEd (Medium Soil, 3 hours} is displayed. Press the Autoset 0 pad to scroll through the self-cleaning settings. HVy (Heavy'Soil, 4 hours} MEd (Medium soil, 3 hours} LITE ( Light Soil, 2 hours} Choosing the soil level of the oven automatically programs the self-cleaning time. After four seconds, the oven wiii start cleaning. ° If the door is not closed, beeps wiii sound and "door" wiii display. If the door is not closed within 30 seconds, the self-cleaning operation wiii be canceled and the display will return to the time of day. ° CLEAN wiii appear in the display. ° LOCK wiii flash in the display. Once the door iocks, the word wiii remain steady. ° The cleaning time wiii start counting down in the display. To Delay a Semf-Olean Cycle: 1. Press the Delay 1 pad. ° DELAY flashes. , 00:00 wiii flash in the display. 1 / Delay 2. Enter the amount of time you want to delay the cycle using the appropriate number pads. 3. Press the Clean pad. ° SET flashes in the display. dean Press the Autoset 0 pad. ° LITE (Light soii ievei} is displayed. 0 _\utoset * Brand names for cleaning products are registered trademarks of the respective manufacturers. 18