McAfee AVDCDE-BA-CA User Guide - Page 91

Using the VShield Scanner 2. For each module that you want to enable, click the corresponding tab, then click Enable. The same button in the property page for active modules will read Disable. 3. Click Close to close the dialog box. Depending on which combination of modules you enable, the VShield icon will display a different state. Method 3: Use the VShield Properties dialog box Follow these steps: 1. Right-click the VShield icon in the Windows system tray to display the VShield shortcut menu, point to Properties, then choose System Scan to open the VShield Properties dialog box. Figure 4-2. VShield Properties dialog box 2. For each module that you want to enable, click the corresponding icon along the left side of the dialog box, then click the Detection tab. 3. Select the Enable checkbox at the top of each page. As you do so, the scanner enables that module. Depending on which combination of modules you enable, the VShield icon displays a different state. If you enable all of its modules, the scanner will display in the Windows system tray, unless you clear the Show icon in the taskbar checkbox in the System Scan Detection property page. User's Guide 91