Home » Netgear Manuals » Bridges & Routers » Netgear C6300 » Manual Viewer

Netgear C6300 User Manual - Page 67

View Internet Port Information, IP Address/Mask - firmware

Add to My Manuals
Save this manual to your list of manuals

Page 67 highlights

AC1750 WiFi Cable Modem Router The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED. The Cable Information pane displays the following: • Hardware Version. The modem router model. • Firmware Version. The version of the modem router firmware. It changes if you upgrade the modem router firmware. • Cable Modem Serial Number. The serial number of the cable modem. • CM Certificate. The status of the cable modem certificate. If Not installed displays as the status, contact your Internet provider. • LAN Port. The following information also displays: - MAC Address. The Media Access Control address. This address is the unique physical address that the Ethernet (LAN) port of the modem router uses. - IP Address/Mask. The IP address that the Ethernet (LAN) port of the modem router uses. The default is 192.168.0.1. - DHCP. Identifies whether the built-in DHCP server of the modem router is active for the LAN-attached devices. For information about using the Reboot button, see Reboot the Modem Router on page 68. View Internet Port Information  To view modem router Internet port information: 1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://routerlogin.net or http://192.168.0.1. A login screen displays. 3. Enter the modem router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED. The Internet Port pane displays these WAN Internet port settings: • MAC Address. The MAC address of the WAN Internet port. • IP Address/Mask. The IP address of the WAN Internet port. • Connection. The type of WAN Internet port connection. • Default Gateway. The IP address of the default gateway. Manage Your Network 67

Section	Page
AC1750 WiFi Cable Modem Router	1
Contents	3
1. Hardware Setup	6
Unpack Your Modem Router	7
Front Panel	7
Rear Panel	9
Position Your Modem Router	9
Retrieve and Display the Product Label	10
Cable Your Modem Router	11
Cable the Modem Router in a Simple Network	11
Cable Your Modem Router to a Router or Gateway	12
2. Connect to the Network and Access the Modem Router	14
Connect to the Network	15
Wired Connection	15
WiFi Connection	15
Types of Logins	16
Log In to the Modem Router	16
3. Specify Initial Settings	17
Notify Your Internet Provider	18
Specify the Cable Connection Starting Frequency	19
View Modem Router Initialization	20
Specify the Internet Connection Settings	21
4. Control Access to the Internet	23
Set Up Parental Controls	24
Use Keywords to Block Internet Sites	26
Block Services from the Internet	28
Schedule When to Block Internet Sites and Services	29
Avoid Blocking on a Trusted Computer	30
Set Up Security Event Email Notifications	31
5. Share a USB Drive Attached to the Modem Router	33
USB Drive Requirements	34
Access a USB Drive on the Network	34
Control Access to the USB Drive	35
Use FTP Within the Network	37
View or Change Network Folders on a USB Drive	38
Add a Network Folder on a USB Drive	39
Edit a Network Folder on a USB Drive	40
Approve USB Devices	40
Safely Remove a USB Drive	42
6. Specify Network Settings	43
View or Change the WAN Settings	44
Change the MTU Size	45
Set Up a Default DMZ Server	47
Change the Modem Router’s Device Name	48
Change the LAN TCP/IP Settings	48
Specify the IP Addresses That the Modem Router Assigns	50
Reserve LAN IP Addresses	51
Use the WPS Wizard for WiFi Connections	53
Specify Basic WiFi Settings	53
Change the WiFi Security Option	55
Set Up a WiFi Guest Network	56
Control the Wireless Radios	58
Use the WiFi On/Off Button	58
Enable or Disable the Wireless Radios	58
Specify WPS Settings	59
Set Up a Wireless Card Access List	60
Dynamic DNS	62
Improve Network Connections with Universal Plug and Play	63
7. Manage Your Network	65
View Modem Router Status	66
View Cable Information	66
View Internet Port Information	67
Wireless Settings	68
Reboot the Modem Router	68
Change the Router Mode	69
View Logs of Modem Router Activity	70
View a Network Map	71
Manage the Modem Router Configuration File	72
Back Up Settings	72
Restore Configuration Settings	73
Erase the Current Configuration Settings	73
Change the admin Password	74
View Event Logs	75
Run the Ping Utility	75
Run the Traceroute Utility	77
View Wireless Access Points in Your Area	78
View or Change the Modem Router Wireless Channel	78
Remote Management	79
8. Specify Internet Port Settings	82
Set Up Port Forwarding to a Local Server	83
Add a Custom Port Forwarding Service	84
Edit a Port Forwarding Service	85
Delete a Port Forwarding Entry	85
Application Example: Make a Local Web Server Public	86
How the Modem Router Implements the Port Forwarding Rule	86
Set Up Port Triggering	87
Add a Port Triggering Service	87
Specify When to Use Port Triggering	89
Application Example: Port Triggering for Internet Relay Chat	90
9. Troubleshooting	91
Use LEDs to Troubleshoot	92
Cannot Log In to the Modem Router	92
Troubleshoot the Cable Internet Connection	93
Troubleshoot a TCP/IP Network Using a Ping Utility	93
Use Ping to Test the LAN Path to Your Modem Router	94
Use Ping to Test the Path from a Windows Computer to a Remote Device	94
A. Supplemental Information	96
Factory Default Settings	97