Netgear C6300 User Manual - Page 97
Factory Default Settings
View all Netgear C6300 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 97 highlights
AC1750 WiFi Cable Modem Router Factory Default Settings To return the modem router to its factory settings, press and hold the Reset button for over seven seconds. The modem router resets and returns to the factory configuration settings shown in the following table. Table 2. Factory default settings Feature Modem router login Local network (LAN) Firewall Internet connection Wireless Default Setting User login URL http://192.168.0.1 User name and password (case-sensitive) admin / password LAN IP 192.168.0.1 Subnet mask 255.255.255.0 DHCP server Enabled DHCP starting IP address 192.168.0.2 DHCP ending IP address 192.168.0.254 Inbound communication from the Disabled (except traffic on port 80, the HTTP port) Internet Outbound communication to the Enabled (all) Internet Source MAC filtering Disabled WAN MAC address Use default hardware address Wireless communication SSID name Security Broadcast SSID Transmission speed Country/region RF channel Operating mode Data rate Output power Access point Enabled As shown on the product label WPA/WPA2.. The default WPA/WPA2 passphrase is on the product label. Enabled Auto1 United States in the US; otherwise varies by region Auto a, n, g, b, and ac Best Full Enabled Supplemental Information 97