Netgear M5300-28G3 Web Management User Guide - Page 102
LLDP-MED Interface Configuration, Extended Power via MDI - PSE
View all Netgear M5300-28G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
ProSafe M5300 Switch LLDP-MED Interface Configuration To display this page, click System LLDP LLDP-MED Interface Configuration. A screen similar to the following displays. To configure LLDP-MED interface settings: 1. To configure LLDP-MED settings on one or more interfaces, select the check box associated with each interface to configure, or select the check box in the heading row to apply the same settings to all interfaces. 2. Use MED Status to specify whether LLDP-MED mode is enabled or disabled on this interface. 3. Use Notification Status to specify the LLDP-MED topology notification mode of the interface. 4. Use Transmit Type Length Values to specify which optional type length values (TLVs) in the LLDP-MED will be transmitted in the LLDP PDUs frames for the selected interface: • MED Capabilities - To transmit the capabilities TLV in LLDP frames. • Network Policy - To transmit the network policy TLV in LLDP frames. • Location Identification - To transmit the location TLV in LLDP frames. • Extended Power via MDI - PSE - To transmit the extended PSE TLV in LLDP frames. • Extended Power via MDI - PD - To transmit the extended PD TLV in LLDP frames. • Inventory Information - To transmit the inventory TLV in LLDP frames. The following table describes the LLDP-MED Interface Configuration fields. Field Link Status Operational Status Description Specifies the link status of the ports whether it is Up/Down. Specifies the LLDP-MED TLVs are transmitted or not on this interface. Configuring System Information 102