Netgear M5300-28G3 Web Management User Guide - Page 323

ProSafe M5300 Switch 8. Use Startup Query Count to specify the value that indicates the configured number of Queries sent out on startup, separated by the Startup Query Interval. 9. Use Last Member Query Interval to enter the last member query interval in milliseconds. This is the maximum response time to be inserted into group-specific queries sent in response to leave group messages, and is also the amount of time between group-specific query messages. Valid values are from 0 to 65535. The default value is 1000 milliseconds. 10. Use Last Member Query Count to enter the number of queries to be sent on receiving a leave group report. Valid values are from 1 to 20. The default value is 2. Field Operational Mode Description The operational status of MLD on the Interface. MLD Routing Interface Statistics To display the MLD Routing Interface Statistics page, click Routing IPv6 Multicast MLD  Routing Interface Statistics. Field Description Interface The interface for which data is to be displayed. Querier Status This value indicates whether the interface is a MLD querier or non-querier on the subnet it is associated with. Querier IP The address of the MLD querier on the IP subnet to which the selected interface is attached. Querier Up Time The time in seconds since the MLD interface querier was last changed. Querier Expiry Time The time in seconds remaining before the other querier present timer expires. If the local system is the querier, this will be zero. Wrong Version Queries Received Indicates the number of queries received whose MLD version does not match the MLD version of the interface. Number of Joins Received The number of times a group membership has been added on this interface. Number of Groups The current number of membership entries for the selected interface in the cache table. Click REFRESH to refresh the data on the screen with the latest MLD routing interface statistics. Routing 323