Netgear M5300-28G3 Web Management User Guide - Page 292
Interface, Interface Mode, Interface Metric, REFRESH, The default value is 1.
View all Netgear M5300-28G3 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 292 highlights
ProSafe M5300 Switch To configure per-interface DVMRP settings: 1. Use Interface to select the interface for which data is to be configured. 2. Use Interface Mode to set the administrative mode of the selected DVMRP routing interface. 3. Use Interface Metric to enter the DVMRP metric for the selected interface. This value is sent in DVMRP messages as the cost to reach this network. Valid values are from(1 to 31). The default value is 1. 4. Click REFRESH to show the latest DVMRP interface information. Field Protocol State Local Address Generation ID Received Bad Packets Received Bad Routes Sent Routes Description The operational state of the DVMRP protocol on the selected interface, either operational or non-operational. The IP address used as a source address in packets sent from the selected interface. The DVMRP generation ID used by the router for the selected interface. This value is reset every time an interface is (re)started and is placed in prune messages. A change in generation ID informs the neighbor routers that any previous information about this router should be discarded. The number of invalid packets received on the selected interface. The number of invalid routes received on the selected interface. The number of routes sent on the selected interface. Routing 292