Netgear M5300-28G3 Web Management User Guide - Page 178

ProSafe M5300 Switch 1. Use Search By to search for MAC Addresses by MAC Address, VLAN ID, and port: • Searched by MAC Address - Select MAC Address from pull-down menu, enter the 6 byte hexadecimal MAC Address in two-digit groups separated by colons, for example 01:23:45:67:89:AB. Then click on the "Go" button. If the address exists, that entry will be displayed as the first entry followed by the remaining (greater) mac addresses. An exact match is required. • Searched by VLAN ID - Select VLAN ID from pull-down menu, enter the VLAN ID, for example 100. Then click on the "Go" button. If the address exists, the entry will be displayed as the first entry followed by the remaining (greater) mac addresses. • Searched by Port - Select Port from pull-down menu, enter the port ID in Unit/Slot/Port, for example 2/1/1. Then click on the "Go" button. If the address exists, the entry will be displayed as the first entry followed by the remaining (greater) mac addresses. 2. Click Go to initiate the search. Field Total MAC Address MAC Address VLAN ID Port Status Description Displaying the number of total MAC addresses learned or configured. A unicast MAC address for which the switch has forwarding and/or filtering information. The format is a 6 byte MAC Address that is separated by colons, for example 01:23:45:67:89:AB. The VLAN ID associated with the MAC Address. The port upon which this address was learned. The status of this entry. The meanings of the values are: • Static: the value of the corresponding instance was added by the system or a user and cannot be relearned. • Learned: the value of the corresponding instance was learned, and is being used. • Management: the value of the corresponding instance is also the value of an existing instance of dot1dStaticAddress. Configuring Switching Information 178