Netgear M5300-28G3 Web Management User Guide - Page 249

ProSafe M5300 Switch OSPF Neighbor Table This screen displays the OSPF neighbor table list. When a particular neighbor ID is specified, detailed information about a neighbor is given. The information below will only be displayed if OSPF is enabled. To display the OSPF Neighbor Table page, click Routing OSPF Advanced  OSPF Neighbor Table. Field Description Interface Displays the interface for which data is to be displayed or configured. Slot 0 is the base unit. Router ID A 32-bit integer in dotted decimal format representing the neighbor interface. Neighbor IP Address The IP address of the neighboring router's interface to the attached network. It is used as the destination IP address when protocol packets are sent as unicasts along this adjacency. Also used in router-LSAs as the Link ID for the attached network if the neighboring router is selected to be designated router. The Neighbor IP address is learned when Hello packets are received from the neighbor. For virtual links, the Neighbor IP address is learned during the routing table build process. Area ID The area ID of the OSPF area associated with the interface. Options An integer value that indicates the optional OSPF capabilities supported by the neighbor. The neighbor's optional OSPF capabilities are also listed in its Hello packets. This enables received Hello Packets to be rejected (i.e., neighbor relationships will not even start to form) if there is a mismatch in certain crucial OSPF capabilities. Router Priority The OSPF priority for the specified interface. The priority of an interface is a priority integer from 0 to 255. A value of '0' indicates that the router is not eligible to become the designated router on this network. Neighbor Interface Index A Unit/Slot/Port identifying the neighbor interface index. Routing 249