Netgear M5300-28G3 Web Management User Guide - Page 22

ProSafe M5300 Switch FAN Status The screen shows the status of the fans in all units. These fans remove the heat generated by the power, CPU, and other chipsets, allowing the chipsets to work normally. Fan status has three possible values: OK, Failure, Not Applicable (NA). The following table describes the Fan Status information. Field Description Unit ID CPU 1/CPU2 Power 1/Power 2 The stack member unit identifier assigned to the switch which the fan belongs to. The working status of each CPU fan. The working status of the power supply fan(s). If the status is N/A, the power supply might not be installed or active, or the switch model might support a single power supply. Click REFRESH to refresh the system information of the switch. Temperature Status The screen shows the current operating temperature of the switch. The temperature is instant and can be refreshed when the REFRESH button is pressed. The maximum temperature of the switch depends on the actual hardware. The following table describes the Temperature Status information. Field Description Unit ID The stack member unit identifier assigned to the switch which the fan belongs to. System The current temperature of the switch. Click REFRESH to refresh the system information of the switch. Configuring System Information 22