Netgear WNR2020 User Manual - Page 43

Set Up the Base Station, ADVANCED > Advanced Setup > Wireless Repeating Function - access point mode

Get Netgear WNR2020 PDF manuals and user guides View all Netgear WNR2020 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 43 highlights

N150 and N300 Wireless Routers wired and wireless clients, but connects to the Internet through the wireless base station. The router can function either as a base station or as a repeater: • Wireless base station. The router acts as the parent access point, bridging traffic to and from the child repeater access point, as well as handling wireless and wired local computers. To configure this mode, you must know the MAC address of the child repeater access point. • Wireless repeater. The router sends all traffic from its local wireless or wired computers to a remote access point. To configure this mode, you must know the MAC address of the remote parent access point. For you to set up a wireless network in a WDS, the following conditions must be met for both access points: • Both access points must use the same SSID, wireless channel, and encryption mode. • Both access points must be on the same LAN IP subnet. That is, all the access point LAN IP addresses are in the same network. • All LAN devices (wired and wireless computers) must be configured to operate in the same LAN network address range as the access points. • The channel selection on the access points cannot be Auto (see Specify Basic WiFi Settings on page 33). • The security option must be WEP (or no security). The WEP option displays only if you select Up to 54 Mbps from the Mode list on the Wireless Settings screen (see Specify Basic WiFi Settings on page 33). Set Up the Base Station The wireless repeating function works only in hub and spoke mode. The units cannot be daisy-chained. You must know the wireless MAC addresses of all units. First, set up the base station and then set up the repeater.  To set up the base station: 1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Advanced Setup > Wireless Repeating Function. The Wireless Repeating Function screen displays. The wireless MAC address of the router displays onscreen. Networking 43

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
Networking
43
N150 and N300 Wireless Routers
wired and wireless clients, but connects to the Internet through the wireless base station.
The router can function either as a base station or as a repeater:
•
Wireless base station
. The router acts as the parent access point, bridging traffic to and
from the child repeater access point, as well as handling wireless and wired local
computers. To configure this mode, you must know the MAC address of the child repeater
access point.
•
Wireless repeater
. The router sends all traffic from its local wireless or wired computers
to a remote access point. To configure this mode, you must know the MAC address of the
remote parent access point.
For you to set up a wireless network in a WDS,
t
he following conditions must be met for both
access points:
•
Both access points must use the same SSID, wireless channel, and encryption mode.
•
Both access points must be on the same LAN IP subnet. That is, all the access point LAN
IP addresses are in the same network.
•
All LAN devices (wired and wireless computers) must be configured to operate in the
same LAN network address range as the access points.
•
The channel selection on the access points cannot be
Auto
(see
Specify Basic WiFi
Settings
on page
33).
•
The security option must be WEP (or no security). The
WEP
option displays only if you
select
Up to 54 Mbps
from the
Mode
list on the Wireless Settings screen (see
Specify
Basic WiFi Settings
on page
33).
Set Up the Base Station
The wireless repeating function works only in hub and spoke mode. The units cannot be
daisy-chained. You must know the wireless MAC addresses of all units. First, set up the base
station and then set up the repeater.
To set up the base station:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type
or
.
A login screen displays.
3.
Enter the router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select
ADVANCED > Advanced Setup > Wireless Repeating Function
.
The Wireless Repeating Function screen displays. The wireless MAC address of the
router displays onscreen.