Netgear WNR2020 User Manual - Page 44
Set Up a Repeater, Enable Wireless Repeating Function
View all Netgear WNR2020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
N150 and N300 Wireless Routers 5. Select the Enable Wireless Repeating Function check box. 6. Select the Wireless Base Station radio button. 7. To prevent wireless clients from associating with the base station and allow LAN client associations only, select the Disable Wireless Client Association check box. You can leave the check box cleared if you prefer wireless clients to be able to associate with the base stations. 8. In the Repeater MAC Address 1 through 4 fields, enter the MAC addresses for the access points that should function as repeaters. If your router is the base station, it can function as the "parent" for up to four other access points. 9. Click the Apply button. Your changes are saved. Set Up a Repeater To set up the repeater to avoid conflicts with the wireless connection to the base station, use a wired Ethernet connection. Note: If you set up your router as a base station with a non-NETGEAR access point as the repeater, you might need to change more configuration settings. In particular, you should disable the DHCP server function on the access point that functions as the repeater. To configure the router as a repeater: 1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. Networking 44