Netgear WNR2020 User Manual - Page 47

Route Name, Private, Active, Apply, To edit a static route, admin, password

Get Netgear WNR2020 PDF manuals and user guides View all Netgear WNR2020 manuals
Add to My Manuals
Save this manual to your list of manuals

Page 47 highlights

N150 and N300 Wireless Routers The screen adjusts: 6. In the Route Name field, type a name for this static route (for identification purposes only). 7. If you want to limit access to the LAN only, select the Private check box. 8. To make this route effective, select the Active check box. By default, the Active check box is selected. 9. Type the IP address of the final destination. 10. Type the IP subnet mask for this destination. If the destination is a single host, type 255.255.255.255. 11. Type the gateway IP address, which must be a router on the same LAN segment as the Wireless Router. 12. Type a number from 1 through 15 as the metric value. This value represents the number of routers between your network and the destination. Usually, a setting of 2 or 3 works, but if this link is a direct connection, set it to 1. 13. Click the Apply button. The route is added to the table on the Static Routes screen.  To edit a static route: 1. Launch a web browser from a computer or wireless device that is connected to the network. 2. Type http://www.routerlogin.net or http://www.routerlogin.com. A login screen displays. 3. Enter the router user name and password. The user name is admin. The default password is password. The user name and password are case-sensitive. The BASIC Home screen displays. 4. Select ADVANCED > Advanced Setup > Static Routes. The Static Routes screen displays. 5. In the table, select the radio button next to the route that you want to edit. 6. Click the Edit button. Networking 47

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
Networking
47
N150 and N300 Wireless Routers
The screen adjusts:
6.
In the
Route Name
field, type a name for this static route (for identification purposes only).
7.
If you want to limit access to the LAN only, select the
Private
check box.
8.
To make this route effective, select the
Active
check box.
By default, the
Active
check box is selected.
9.
Type the IP address of the final destination.
10.
Type the IP subnet mask for this destination. If the destination is a single host, type
255.255.255.255
.
11.
Type the gateway IP address, which must be a router on the same LAN segment as the
Wireless Router.
12.
Type a number from 1 through 15 as the metric value.
This value represents the number of routers between your network and the destination.
Usually, a setting of 2 or 3 works, but if this link is a direct connection, set it to
1
.
13.
Click the
Apply
button.
The route is added to the table on the Static Routes screen.
To edit a static route:
1.
Launch a web browser from a computer or wireless device that is connected to the
network.
2.
Type
or
.
A login screen displays.
3.
Enter the router user name and password.
The user name is
admin
. The default password is
password
. The user name and
password are case-sensitive.
The BASIC Home screen displays.
4.
Select
ADVANCED > Advanced Setup > Static Routes
.
The Static Routes screen displays.
5.
In the table, select the radio button next to the route that you want to edit.
6.
Click the
Edit
button.