Netgear XSM4324FS Software Administration Manual Software Version 12.x - Page 220

M4300 Series and M4300-96X Fully Managed Switches 2. Verify that the sequence numbers are assigned by the switch. The first sequence number is 10, the second sequence number is 20, and so on. (Netgear Switch) (Config)#show ip access-lists voice_acl ACL Name: voice_acl Sequence Number: 10 Action permit Match All False Protocol 255(ip) IP DSCP 40(cs5) Sequence Number: 20 Action permit Match All False Protocol 255(ip) IP DSCP 46(ef) Sequence Number: 30 Action deny Match All TRUE 3. If you must add more than 10 ACL rules, change the start sequence number and sequence increment number before you add ACL rules. In the following example, the start sequence number is 1000 and the sequence increment number is 100. (Netgear Switch) (Config)#ip access-list resequence voice_acl 1000 100 (Netgear Switch) (Config)#show ip access-lists voice_acl ACL Name: voice_acl Sequence Number: 1000 Action permit Match All False Protocol 255(ip) IP DSCP 40(cs5) Sequence Number: 1100 Action permit Match All False Protocol 255(ip) IP DSCP 46(ef) Sequence Number: 1200 Action deny Match All TRUE ACLs 220 Software Administration Manual