Netgear XSM4324FS Software Administration Manual Software Version 12.x - Page 86

M4300 Series and M4300-96X Fully Managed Switches Note that this field should have a network IP address, not a host IP address. Do not enter something like 10,100.100.1. The last number should always be 0 (zero). 4. In the Subnet Mask field, enter a value that matches the subnet range that you want to use. 5. The Preference field is optional. A value of 1 is entered by default if you do not enter a number. 6. Click the Add button on the bottom of the screen. The screen is updated with the static route shown in the routing table. 7. To remove a route entry, either static or default, select the check box to the left of the entry, and click the Delete button on the bottom of the screen. Port Routing 86 Software Administration Manual