Netgear XSM4324FS Software Administration Manual Software Version 12.x - Page 387

M4300 Series and M4300-96X Fully Managed Switches 2. Display the configuration of the IPv6 RA Guard feature on port 1/0/1. (Netgear Switch) #show ipv6 nd raguard policy Ipv6 RA-Guard Configured Interfaces Interface Role 1/0/1 Host 3. Display the router advertisement (RA) and redirect (REDIR) messages that were dropped by the IPv6 RA Guard feature. (Netgear Switch) #Show ipv6 snooping counters IPv6 Dropped Messages RA(Router Advertisement - ICMP type 134) REDIR(Router Redirect - ICMP type 137)To configure the IPv6 RA Guard feature, display the configuration, and display the dropped messages: 1. Configure the IPv6 RA Guard feature on port 1. 2. Display the configuration of the IPv6 RA Guard feature on port 1/0/1. RA Redir --- ------- 0 0 Changing the SSH/Telnet Login Method to Radius The following example shows how to change the SSH/Telnet login method to Radius. By default, SSH/Telnet login is authenticated by local. If you want to use other method like Radius or Radius, or want to configure more methods for the SSH/Telnet login, follow the steps below: CLI: Change the SSH/Telnet Login Method to Radius To change the SSH/Telnet login method to Radius through the CLI: 1. Change the authentication list 'networkList' to radius as the authentication method. (Netgear Switch) (Config)#aaa authentication login networkList radius Security Management 387 Software Administration Manual