Netgear XSM4324FS Software Administration Manual Software Version 12.x - Page 694

M4300 Series and M4300-96X Fully Managed Switches Local Browser Interface: Block a Captive Portal Instance 1. Select Security > Control > Captive Portal > CP Configuration. A screen similar to the following displays. 2. Under Captive Portal Configuration, scroll down and select the CP 1 check box. Now CP 1 appears in the CP ID field at the top. 3. In the Block field, select Enable. 4. Click Apply to save the settings. Local Authorization, Create Users and Groups When using local authentication, the administrator provides user identities for captive portal by adding unique user names and passwords to the local user database. This configuration is global to the captive portal component and can contain up to 128 user entries (a RADIUS server should be used if more users are required). A local user can belong to one or more groups. There is one group created by default with the group name Default to which all new users are assigned. All new captive portal instances are also assigned to the Default group. You can create new groups and modify the user/group association to allow only a subset of users access to a specific captive portal instance. Network access is granted upon successful user name, password, and group verification. CLI: Create Users and Groups 1. Create a group whose group ID is 2. (Netgear Switch) #config (Netgear Switch) (config)#captive-portal (Netgear Switch)(Config-CP)# user group 2 Captive Portals 694 Software Administration Manual