Netgear XSM4324FS Software Administration Manual Software Version 12.x - Page 433

M4300 Series and M4300-96X Fully Managed Switches Local Browser Interface: Configure the Session Time-out 1. Select Security > Access > Telnet. A screen similar to the following displays. 2. Enter the following information: • In the Session Timeout (Minutes) field, enter 15. • In the Maximum Number of Sessions field, enter 5. 3. Click the Apply button. Your settings are saved. Error Disablement and Automatic Error Recovery The switch supports interface error disablement, also referred to as Diagnostic Disable (D-Disable), and error autorecovery of the disabled interface. If the switch detects an error condition for an interface, it places the interface in a diagnostic-disabled (error-disabled) state by shutting down the interface. The error-disabled interface does not allow any traffic until the interface is reenabled. Either you can manually reenable the error-disabled interface or you can enable the error autorecovery feature, which automatically reenables the interface after the expiration of the time-out interval. The default time-out for autorecovery is 300 seconds. If an interface is reenabled but the reason that the interface was placed in the D-Disable state is not resolved, the interface is placed back in the D-Disable state. Tools 433 Software Administration Manual