Netgear XSM4324FS Software Administration Manual Software Version 12.x - Page 49

M4300 Series and M4300-96X Fully Managed Switches 2. Include the ports 1/0/1 and 1/0/2 in VLAN 10. (Netgear Switch) (Config)#interface range 1/0/1-1/0/2 (Netgear Switch) (conf-if-range-1/0/1-1/0/2)#vlan participation include 10 (Netgear Switch) (conf-if-range-1/0/1-1/0/2)#vlan tagging 10 (Netgear Switch) (conf-if-range-1/0/1-1/0/2)#exit 3. Configure Voice VLAN globally. (Netgear Switch) (Config)# voice vlan 4. Configure Voice VLAN mode in the interface 1/0/2. (Netgear Switch) (Config)#interface 1/0/2 (Netgear Switch) (Interface 1/0/2)#voice vlan 10 (Netgear Switch) (Interface 1/0/2)#exit Note: Steps 5 through 9 are optional. These steps assign the packets with the VLAN ID 10 to a high priority queue. 5. Create the DiffServ class ClassVoiceVLAN. (Netgear Switch) (Config)#class-map match-all ClassVoiceVLAN 6. Configure VLAN 10 as the matching criteria for the class. (Netgear Switch) (Config-classmap)#match vlan 10 7. Create the DiffServ policy PolicyVoiceVLAN. (Netgear Switch) (Config)#policy-map PolicyVoiceVLAN in 8. Map the policy and class and assign them to the higher-priority queue. (Netgear Switch) (Config-policy-map)#class ClassVoiceVLAN (Netgear Switch) (Config-policy-classmap)#assign-queue 3 (Netgear Switch) (Config-policy-classmap)#exit VLANs 49 Software Administration Manual