Netgear XSM4324FS Software Administration Manual Software Version 12.x - Page 41

M4300 Series and M4300-96X Fully Managed Switches b. In the Group ID list, select 1. c. Click the gray box under port 11. A check mark displays in the box. d. Click the Apply button. 5. Add port 11 to the group vlan_ip. a. Select Switching > VLAN > Advanced > Protocol Based VLAN Group Membership. A screen similar to the following displays. b. In the Group ID list, select 2. c. Click the gray box under port 11. A check mark displays in the box. d. Click Apply. Virtual VLANs: Create an IP Subnet-Based VLAN In an IP subnet-based VLAN, all the end workstations in an IP subnet are assigned to the same VLAN. In this VLAN, users can move their workstations without reconfiguring their network addresses. IP subnet VLANs are based on Layer 3 information from packet headers. The switch makes use of the network-layer address (for example, the subnet address for TCP/IP networks) in determining VLAN membership. If a packet is untagged or priority tagged, the switch associates the packet with any matching IP subnet classification. If no IP subnet classification can be made, the packet is subjected to the normal VLAN classification rules of the switch. This IP subnet capability does not imply a routing function or that the VLAN is routed. The IP subnet classification feature affects only the VLAN assignment of a packet. Appropriate 802.1Q VLAN configuration must exist in order for the packet to be switched. VLANs 41 Software Administration Manual