Netgear XSM4324FS Software Administration Manual Software Version 12.x - Page 525

M4300 Series and M4300-96X Fully Managed Switches Configure Multiple STP (802.1s) The example is shown as CLI commands and as a local browser interface procedure. CLI: Configure Multiple STP (802.1s) (Netgear switch) (Config)# spanning-tree (Netgear switch) (Config)# spanning-tree mode mst (Netgear Switch) (Config)#spanning-tree configuration name mstp_1 (Netgear Switch) (Config)#spanning-tree configuration revision 0 Configure an MSTP region name and revision for the switches in the same MSTP region. The switches in the same MSTP region must be configured with the same region name and revision. Create a mst instance 1: (Netgear switch) (Config)# spanning-tree mst instance 1 Associate the mst instance 1 with the VLAN 2 and 3: (Netgear switch) (Config)# spanning-tree mst priority 1 4096 (Netgear switch) (Config)# spanning-tree mst vlan 1 2 (Netgear switch) (Config)# spanning-tree mst vlan 1 3 Create a mst instance 2: (Netgear switch) (Config)# spanning-tree mst instance 2 Associate the mst instance 2 with the VLAN 11 and 12: (Netgear switch) (Config)# spanning-tree mst priority 2 4096 (Netgear switch) (Config)# spanning-tree mst vlan 2 11 (Netgear switch) (Config)# spanning-tree mst vlan 2 12 Configure the priority and cost on port 1/0/3: (Netgear switch) (Interface 1/0/3)# spanning-tree mst 1 port-priority 128 (Netgear switch) (Interface 1/0/3)# spanning-tree mst 1 cost 0 STP 525 Software Administration Manual