Netgear XSM4324FS Software Administration Manual Software Version 12.x - Page 419

M4300 Series and M4300-96X Fully Managed Switches Consider the following: • The total number of scripts stored is limited by the NVRAM/FLASH size. • Application of scripts is partial if a script fails. For example, if the script executes 5 of 10 commands and the script fails, the script stops at 5. • Scripts cannot be modified or deleted while being applied. • Validation of scripts checks for syntax errors only. It does not validate that the script will run successfully. script Command (Netgear Switch) #script ? apply delete list show validate Applies configuration script to the switch. Deletes a configuration script file from the switch. Lists all configuration script files present on the switch. Displays the contents of configuration script. Validate the commands of configuration script. script list Command and script delete Command (Netgear Switch) #script list Configuration Script Name basic.scr running-config.scr Size(Bytes) ----------93 3201 2 configuration script(s) found. 1020706 bytes free. (Netgear Switch) #script delete basic.scr Are you sure you want to delete the configuration script(s)? (y/n) y 1 configuration script(s) deleted. Tools 419 Software Administration Manual