Oki C5300n OKI C5300 User's Guide: Mac (Am English) - Page 119

Network Menu (cont.) Note: Factory default settings are shown in bold. Item Settings Explanation FRAME TYPE IP ADDRESS SET AUTO 802.2 802.3 ETHERNET II SNAP AUTO MANUAL IP ADDRESS xxx.xxx.xxx.xxx Default = 192.168.100.100 SUBNET MASK xxx.xxx.xxx.xxx Default = 255.255.255.000 GATEWAY ADDRESS xxx.xxx.xxx.xxx Default = 192.168.100.254 INITIALIZE NIC? [EXECUTE] WEB/IPP ENABLE DISABLE Selects the Ethernet MAC layer frame type. Change this to Manual to specify the IP address through the front panel.(see next entry) Required for non-DHCP networks. Current assigned IP address. To change: • Press ENTER. • Use +/- keys to increment first octet. • Press ENTER to move on to the next octet. • Use +/- keys to increment second octet. • Press ENTER to move on to the next octet. • Use +/- keys to increment third octet. • Press ENTER to move on to the last octet. • Use +/- keys to increment 1st octet. • Press ENTER to register the new address. Current assigned subnet mask. To change, proceed as above. Current assigned gateway address. To change, proceed as above. Initializes the network card. Enables or disables Web config. facility and Internet Printing Protocol. This item will not appear in the menu if TCP/IP is set to DISABLE. C5300 Menu Functions • 119