Oki C5300n OKI C5300 User's Guide: Mac (Am English) - Page 191

Faint printing, Fading in patches, Longitudinal black stripes

Page 191 highlights

Faint printing Possible cause Remedy The toner cartridge is Reinstall the toner cartridge (see "Toner Cartridge incorrectly installed. Replacement" on page 131). Toner is low. Change toner cartridge (see "Toner Cartridge Replacement" on page 131). The paper is moist. Store paper within specified temperature and humidity levels (see "Specifications" on page 195). Paper is unsuitable for Use recommended paper (see"Media printer. Recommendations" on page 11 ). Fading in patches Possible cause The paper is moist. Remedy Store paper within specified temperature and humidity levels (see "Specifications" on page 195). Longitudinal black stripes Possible cause Remedy Image drum is damaged. Replace image drum (see "Image Drum Replacement" on page 138). Toner is low. Change toner cartridge (see "Toner Cartridge Replacement" on page 131). Periodic black lateral lines or spots. • If the lines or spots occur at intervals of approximately 44 - 94 mm, the green surface of the image drum is damaged or dirty. If damaged, replace the image drum cartridge (see "Image Drum Replacement" on page 138). If dirty, wipe the image drum gently with soft tissue. If this does not work, replace the image drum. • If the lines or spots occur at intervals of approximately 113 mm, the fuser roller is damaged. Change the fuser (see "Fuser Replacement" on page 152). C5300 Troubleshooting • 191

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186
  • 187
  • 188
  • 189
  • 190
  • 191
  • 192
  • 193
  • 194
  • 195
  • 196
  • 197
  • 198
  • 199
  • 200
  • 201
  • 202
  • 203
  • 204
  • 205
  • 206
  • 207
  • 208
  • 209
  • 210
  • 211

C5300 Troubleshooting
• 191
Faint printing
Fading in patches
Longitudinal black stripes
Possible cause
Remedy
The toner cartridge is
incorrectly installed.
Reinstall the toner cartridge (see “Toner Cartridge
Replacement” on page 131).
Toner is low.
Change toner cartridge (see “Toner Cartridge
Replacement” on page 131).
The paper is moist.
Store paper within specified temperature and
humidity levels (see “Specifications” on
page 195).
Paper is unsuitable for
printer.
Use recommended paper (see“Media
Recommendations” on page 11 ).
Possible cause
Remedy
The paper is moist.
Store paper within specified temperature and
humidity levels (see “Specifications” on page 195).
Possible cause
Remedy
Image drum is
damaged.
Replace image drum (see “Image Drum
Replacement” on page 138).
Toner is low.
Change toner cartridge (see “Toner Cartridge
Replacement” on page 131).
Periodic black lateral
lines or spots.
If the lines or spots occur at intervals of
approximately 44 - 94 mm, the green surface of
the image drum is damaged or dirty. If damaged,
replace the image drum cartridge (see “Image
Drum Replacement” on page 138). If dirty, wipe
the image drum gently with soft tissue. If this
does not work, replace the image drum.
If the lines or spots occur at intervals of
approximately 113 mm, the fuser roller is
damaged. Change the fuser (see “Fuser
Replacement” on page 152).