Optoma ZU1100 Manual - Page 30
USING THE PROJECTOR, Powering on / off the projector
![]() |
View all Optoma ZU1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
USING THE PROJECTOR Powering on / off the projector Powering on 1. Securely connect the AC power cord and signal/source cable to the projector. 2. Set the power switch to the "I" (ON) position and wait until the power button " " on the projector keypad is solid orange. 3. Turn on the projector by pressing the ON button " " on the remote control or the power button " " on the projector keypad. The status LED is orange with a long blink and the status LED will turn to solid green. or Note: If the projector is turned on for the first time, you will be prompted to select the projector language, projection orientation, and other settings. 30 English
![](/manual_guide/products/optoma-zu1100-manual-decf679/30.png)
English
30
USING THE PROJECTOR
Powering on / off the projector
Powering on
1.
Securely connect the AC power cord and signal/source cable to the projector.
2.
Set the power switch to the “
I
“ (ON) position and wait until the power button “
” on the projector
keypad is solid orange.
3.
Turn on the projector by pressing the
ON
button “
” on the remote control or the power button “
” on
the projector keypad.
The status LED is orange with a long blink and the status LED will turn to solid green.
or
Note:
If the projector is turned on for the first time, you will be prompted to select the projector language, projection
orientation, and other settings.