Optoma ZU1100 Manual - Page 99
Specifications, Optical, Electrical, Mechanical
View all Optoma ZU1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
ADDITIONAL INFORMATION Specifications Optical Resolution Lens Projection distance Description WUXGA (1920 x 1200) Power Zoom/Focus and full lens shift Please refer to "Throw Distance" spec. in "Image size and projection distance" on page 91. Electrical Inputs Outputs Control port Power requirement Description 2 x HDMI In (version 2.0) (with locking screw) 1 x DVI-D 1 x HDBaseT 1 x 3G-SDI In 1 x 3D SYNC In 1 x HDMI Out (version 2.0) (with locking screw) 1 x 3D SYNC Out 1 x RS232 (D-sub 9 pin) (PC Control) 1 x Wired in (3.5mm phone jack) (Remote In) 1 x 12V Trigger (3.5mm phone jack / Black) 1 x USB type A (5V/0.5A) 1 x RJ-45 (LAN) 2 x IR Receiver (Front / Top) 100-240V~ 50/60 Hz, 8.5A Mechanical Description Installation orientation 360° rotation, no restrictions Dimensions 484 (W) x 529 (D) x 207.8 (H) mm (w/o lens, with feet) 484 (W) x 529 (D) x 195 (H) mm (w/o lens, w/o feet) Environmental conditions Operating: 0°C ~ 40°C*(32~104°F); 10~85%RH, non-condensing Storage: -10°C ~ 60°C(14~140°F); 5~90%RH, non-condensing Note: If High Altitude >5000 ft, the system will be operated at the range of 0~35°C to ensure the normal operation of the projector. The light power will be reduced due to the high ambient temperature (≥35°C). Note: All specifications are subject to change without notice. English 99