Optoma ZU1100 Manual - Page 63
Lens Memory, Save Memory, Apply Memory, Lens Calibration, Lens Lock, Reset
View all Optoma ZU1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 63 highlights
USING THE PROJECTOR Note: BX-CTA17 floating ring For better optical performance, manually adjust the floating ring before adjusting Zoom & Focus. Floating ring's label scale shows the projection distance. The projection distance is from the projector lens to the screen. For example, if the distance between the screen and the projector lens is 1.4 m, adjust the floating ring scale to "1.40" for better performance. label sticker 150.75 ±2 (Far: 148.75 Near: 152.75) 83.85 Flange back Ø 146 Floating rings label sticker Fixed ring 23.5 19.5 Floating ring Lens Memory This projector can save up to five lens settings, which records the lens position. To record correct data, please perform lens calibration at first time processing lens memory. Save Memory: Select a record from 1 to 5 to save the current lens settings. Apply Memory: Select a record from 1 to 5 to apply the lens settings. Clear Memory: Clear the saved lens records. Note: Must Save Memory before Apply Memory, otherwise the function of apply memory will gray out or disable. Performing a lens calibration will clear the saved lens records. BX-CTA16 setup requires a special support kit. For more information, please refer to the BX-CTA16 user manual. Lens Calibration Calibrate the lens position to return it to the center. To prevent damage to the projector and the lens, always perform lens calibration before replacing the lens. Lens Lock Lock the lens to prevent the lens motors from moving, which disables all lens functions. Reset Reset the lens settings to factory default values. English 63