Optoma ZU1100 Manual - Page 72
Baud Rate, Reset, Telnet
View all Optoma ZU1100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
USING THE PROJECTOR AMX Control the projector with AMX devices. (Port: 9131) For more information, please visit http://www.amx.com. Telnet Control the projector using RS232 commands though Telnet connection. (Port: 23) For more information, refer to "Using RS232 command by Telnet" on page 76. HTTP Control the projector with web browser. (Port: 80) For more information, refer to "Using the web control panel" on page 73. Optoma Management Suite (OMS) Control the projector with OMS. For more information, please visit https://www.optoma.com. Reset Reset the control functions to default factory values. Projector (Ethernet) Note Crestron is a registered trademark of Crestron Electronics, Inc. of the United States. Extron is a registered trademark of Extron Electronics, Inc. of the United States. AMX is a registered trademark of AMX LLC of the United States. PJLink applied for trademark and logo registration in Japan, the United States of America, and other countries by JBMIA. For more information about the various types of external devices which can be connected to the LAN / RJ45 port and remotely control the projector, as well as the supported commands for these external devices, please contact the Support-Service directly. Baud Rate Set the baud rate for Serial Port In and Serial Port Out. The available options are 1200, 2400, 4800, 9600, 19200, 38400, 57600, and 115200. Reset Reset all network settings to default factory values. 72 English