Panasonic AJHD1400 AJHD1400 User Guide - Page 16
Reference signals
View all Panasonic AJHD1400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Parts and their functions (continued) IEEE1394 digital input/output connector This unit is capable of input and output through a digital interface conforming to the IEEE1394 standard. Use 6pin connectors. Does not support bus power. Reference signals During tape playback, the video output reference signals are as shown in the table below. In the 59.94 Hz/60 Hz or 50 Hz mode Input signals REF_IN HD_REF_IN SD_REF_IN None INPUT Input Not input Input Not input Input Not input AUTO HD_REF_IN HD_REF_IN SD_REF_IN SD_REF_IN INPUT Internal HD Menu item No.031 HD_REF HD_REF_IN HD_REF_IN Internal HD Internal HD Internal HD Internal HD SD_REF Internal SD Internal SD SD_REF_IN SD_REF_IN Internal SD Internal SD INPUT*1 INPUT Internal HD INPUT Internal SD INPUT Internal HD *1 If "1394" or "INT SG (internal standard signal)" is selected for the video input signal, the video output reference signal will always be "Internal HD." z When "E-AUTO" is selected in menu No. 031 OUT REF, the unit operates as if "INPUT" is selected in edit mode or "AUTO" is selected in modes other than the edit mode. z When using the SD > HD up-converter and HD > HD cross-converter, input the HD tri-level sync signal that supports the HD output format in order to initiate operation using HD_REF_IN. In the 23.98 Hz/24 Hz mode Input signals REF_IN HD_REF_IN None HD_REF_IN Internal HD In the 25 Hz (HD), 25 Hz (SD), 50 Hz (HD) or 50 Hz (SD) mode Input signals REF_IN HD_REF_IN SD_REF_IN None AUTO HD_REF_IN SD_REF_IN Internal HD Menu item No.031 HD_REF HD_REF_IN Internal HD Internal HD SD_REF Internal SD SD_REF_IN Internal SD INPUT Internal HD Internal HD Internal HD z In the 25 Hz (HD) or 50 Hz (HD) mode, black signals are output from the SD SDI output and analog composite output connectors. z In the 25 Hz (SD) or 50 Hz (SD) mode, black signals are output from the HD SDI output and analog component output connectors. z All the HD SDI output, SD SDI output, video output, analog component output, audio output and TC output signals are output in phase with the REF input. Internal HD: With HD tape playback as the reference, operation uses a 74 MHz clock signal in the free-run mode. Internal SD: With SD tape playback as the reference, operation uses a 4fsc clock signal in the free-run mode. 16