Panasonic AJHD1400 AJHD1400 User Guide - Page 60

Error messages (continued) If "T&S&M" is selected in the menu No. 008 DISPLAY SEL, a message appears in the modedisplay whenever a warning or error occurs. When multiple events occur, the event with the highest priority is displayed. Priority Display Error messages High (See error message table) INT SG NO INPUT Low Warning messages (See error message table) Description When an operational malfunction has occurred in the unit, the error number flashes and the error message is indicated on the counter display. When SG has been selected as the input signal by the INPUT SELECT button, the "INT SG" display will appear for the first two seconds at the start of operation (EE mode) when the REC button is pressed. If there are no input signals--with the exception of the analog audio signals-- supplied to the connectors selected by the INPUT SELECT button, the "NO INPUT" display will appear for the first two seconds at the start of operation (EE mode) when the REC button is pressed. When a warning occurs in this unit, the error number and warning message are indicated on the counter display. When multiple warnings occur, the warning with the highest priority is displayed. UMID information display This is displayed when UMID information is present on the input signal in EE mode. This lamp lights during tape playback when UMID information has been recorded on the tape. "NO-INFO" is displayed when there is no UMID information. Display MATNO COPY OWNR POS DATE TIME Description Material number Instance number (No. of copies) Country, organization, user Reception status from GPS satellites when recording spatial coordinates (height above sea level, longitude and latitude): HOLD: No reception from any satellite 2D: Reception possible, but number of satellites is insufficient. Height above sea level will not be accurate. 3D: Good reception Date UTC (Coordinated Universal Time) and time difference with UTC 60