Panasonic AJHD1400 AJHD1400 User Guide - Page 42
Mode To Frm, Aj-hdc27f, H
View all Panasonic AJHD1400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Setup menus (continued) OPERATION (continued) No./Item Description of setting 155*1 AUTO REC For setting whether the recording/stop is executed automatically in conjunction with the Recording Mark of the HD SDI input signals from our camera recorder or not. 0000 OFF : Do not to execute the recording/stop automatically. 0001 TYPE1 : To execute the recording/stop automatically in conjunction with the Recording Mark in the LTC information added to the HD SDI. 0002 TYPE2 : To execute the recording/stop automatically in conjunction with the Recording Mark in the SVITC information added to the HD SDI. z Set the LOCAL/REMOTE switch to the REMOTE position. z For the selection of TYPE 1 or TYPE 2, refer to "Our camera recorder, Recording format, and Recording Mark." z To select TYPE 1 or TYPE 2 to start recording automatically, set this unit to the REC PAUSE mode. It may not operate in any mode other than the REC PAUSE mode. After accepting the auto stop, this unit changes to the REC PAUSE mode. z When this unit is recording in normal operation, the AUTO REC function is not available. *1 Displayed menus may vary depending on the settings in menu No. 25 SYSTEM FREQ. For details, refer to "Menus which are displayed" (page 32). Our camera recorder, Recording format, and Recording Mark Model Recording format Recording Mark TYPE Remarks AJ-HDC27F, H 720/¢¢p over 60p TYPE1 ʔ AJ-HDX400 1080/59.94i -*2 AJ-HDX400E AJ-HDX900 1080/50i 1080/25p over 50i 720/59.94p 720/23.98p over 59.94p 720/29.97p over 59.94p 1080/59.94i 1080/23.98p over 59.94i 1080/29.97p over 59.94i 1080/50i 1080/25p over 50i 720/50p -*2 -*2 TYPE1 TYPE1 TYPE1 -*2 TYPE2 -*2 -*2 -*2 TYPE1 It is possible to switch between TYPE 1 and TYPE 2. TYPE-1 and TYPE-2 are the initial settings for the camera recorder. If the unit is used with the TYPE-1 settings, set the UB MODE of the camera to "FRM RATE". If it is used with the TYPE-2 settings, set the VITC UB MODE to "FRM RATE." 720/25p over 50p TYPE1 *2 In the initial settings, the Recording Mark is not overlapped on the HD SDI signals. No./Item Description of setting 160 MEMORY MODE For setting the repeat playback mode. 0000 OFF : No repeat playback (normal operation). 0001 M-STOP : The tape stops near the BEGIN point when it is fast forwarded or rewound. 0002 REPT1 : When the tape reaches the END point, it is rewound to the BEGIN point, and stops. 0003 CONT : When the tape reaches the END point, it is rewound to the BEGIN point, and plays back, and this is done repeatedly. 161 CTL BGN or TC BGN For setting the BEGIN point in the repeat playback mode. Either TC or CTL is set as the counter display mode using the COUNTER button. If no mode is set appears, and the tape start serves as the BEGIN point. 162 For setting the END point in the repeat playback mode. END Either TC or CTL is set as the counter display mode using the COUNTER button. If no mode is set appears, and the tape end serves as the END point. 163 REPT MODE For setting what images are to be output while the tape returns to the BEGIN point in the repeat playback mode. 0000 FREEZE : The tape returns to the BEGIN point with the image played back at the END point still frozen. 0001 BLACK : The tape returns to the BEGIN point while the screen remains black. 0002 MENU : The tape returns to the BEGIN point following the the settings in menu No. 140 OUTPUT. If the tape end is set as the END point when "FREEZE" is selected, the playback image will not be frozen properly. Set the END point to a place within the range where images are recorded. 180 BATTERY SEL For setting the type of battery. 0000 NiCd12 : Settings for 1 pc. 12 V battery (NEAR: 11.2 V, END: 10.6 V) 0001 NiCd13 : Settings for 1 pc. 13 V battery (NEAR: 12.0 V, END: 10.6 V) 0002 NiCd14 : Settings for 1 pc. 14 V battery (NEAR: 13.6 V, END: 10.6 V) 0003 S-LION : Settings for 1 pc. lithium-ion battery "BP-L90A". (NEAR: 11.7 V, END: 10.6 V) 0004 I-LION : Settings for 1 pc. lithium-ion battery "ENDURA80". (NEAR: 12.9 V, END: 12.4 V) 0005 TYPE-A : Setting for using the battery selected by the menu item No.181 TYPE-A NEAR item and No.182 TYPE-A END item 0006 TYPE-B : Setting for using the battery selected by the menu item No.183 TYPE-B NEAR item and No.184 TYPE-B END item "_____" indicates the factory setting. 42