Panasonic AJHD1400 AJHD1400 User Guide - Page 43
INTERFACE, No./Item, Description of setting, TYPE-A, <Note>, TYPE-A END, V IN SEL INH, ID SEL
View all Panasonic AJHD1400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
Setup menus (continued) OPERATION (continued) No./Item Description of setting 181*1 TYPE-A NEAR For setting (in increments of 0.1 V) the voltage level at which the counter flashes as warning for TYPE-A battery (selected as the menu item No.180 BATTERY SEL item). Use when adjusting the settings for multiple batteries or new type batteries. 0000 10.6 : : 0023 12.9 : : 0044 15.0 When this item has been set to a voltage level close to 15.0 V, the counter display may flash even when an AC power source is being used. 182*1 For setting (in increments of 0.1 V) the voltage level at TYPE-A END which the TYPE-A battery (selected as the menu item No.180 BATTERY SEL item) is to be automatically turned off. Use when adjusting the settings for multiple batteries or new type batteries. 0000 10.6 : : 0018 12.4 : : 0034 14.0 183*1 TYPE-B NEAR For setting (in increments of 0.1 V) the voltage level at which the counter flashes as warning for TYPE-B battery (selected as the menu item No.180 BATTERY SEL item). Use when adjusting the settings for multiple batteries or new type batteries. 0000 10.6 : : 0023 12.9 : : 0044 15.0 When this item has been set to a voltage level close to 15.0 V, the counter display may flash even when an AC power source is being used. 184*1 For setting (in increments of 0.1 V) the voltage level at TYPE-B END which the TYPE-B battery (selected as the menu item No.180 BATTERY SEL item) is to be automatically turned off. 0000 10.6 : : 0018 12.4 : : 0034 14.0 190*2 For selection of the video input switching mode with V IN SEL INH the INPUT SELECT switch. 0000 OFF : Video input switching with the INPUT SELECT switch is enabled. 0001 ON : Video input switching with the INPUT SELECT switch is prohibited. 0002 REC : After this unit shifts to recording (except editing), video input switching with the INPUT SELECT switch is prohibited. No./Item Description of setting 191*2 Select the audio input switching mode with the INPUT A IN SEL INH SELECT switch. 0000 OFF : Select the audio input switching mode with the INPUT SELECT switch. 0001 ON : Video input switching with the INPUT SELECT switch is prohibited. 0002 REC : After this unit shifts to recording (except editing), video input switching with the INPUT SELECT switch is prohibited. *1 Even if the RESET button is pressed while pressing the SEARCH button, the value may not return to the factory setting. *2 Displayed menus may vary depending on the settings in menu No. 25 SYSTEM FREQ. For details, refer to "Menus which are displayed" (page 32). INTERFACE No./Item Description of setting 202 ID SEL For setting the ID information to be returned to the controller. 0000 OTHER : The ID information of the VTR other than DVCPRO is set. 0001 DVCPRO : The DVCPRO ID information is set. 0002 ORIG : Set this only when the unit is connected to a Panasonic controller (such as the AG-A850, optional accessory). Select 1 (DVCPRO) or 2 (ORIG) if "23/24," "25(HD)," "25(SD)," "50(HD)" or "50(SD)" is selected as the menu item No.25 SYSTEM FREQ setting. "_____" indicates the factory setting. 43