Panasonic AJHD1400 AJHD1400 User Guide - Page 50

Setup menus (continued) VIDEO (continued) No./Item Description of setting 692*1 UMID POS This sets the line on which the UMID information is to be superimposed. 0000 BLANK 0001 12L : : 0006 17L : : 0008 19L z The line selected for the menu item No. 501 VITC POS-1 and No. 502 VITC POS-2 settings cannot be selected for this item. z The default settings are not restored even if the RESET button is pressed while holding down the SEARCH button. z Metadata recorded on the tape will be output giving UMID information first priority. When metadata is output, set to a line other than the original multiplexed line or select "BLANK." 693 This selects gamma correction. GAMMA SEL 0000 OFF : Gamma correction is not carried out. 0001 GAMMA1 : This corrects video images shot with the cine gamma FilmREC mode of the Varicam to images of film quality (equivalent to Telecine 5 of HD Gamma Corrector in AJ-GBX27G). 0002 GAMMA2 : This corrects video images shot with the cine gamma FilmREC mode of the Varicam to images of film quality (equivalent to Telecine 6 of HD Gamma Corrector in AJ-GBX27G). 0003 GAMMA3 : This converts video images shot with the cine gamma FilmREC mode of the Varicam into the Cineon curve appropriate for film recording. 1023 768 512 TELECINE5 TELECINE6 256 Cineon No./Item Description of setting 695*1 BLANK LINE*DW For selecting the blanking ON/OFF for a period of vertical blanking on video signals of the SD output. 0000 BLANK : All the lines are forcibly blanked. 0001 THRU : None of the lines are blanked. 0002 MANU : Blanking ON or OFF is selected on a line-byline basis. z When setting "MANU," if the STOP button is pressed, the screen shifts to the sub screen and the ON/OFF setting for each line can be adjusted. Press the STOP button again to return to the main screen. z Lines that are selected as being blanked in this menu item are similarly blanked before being up- converted when replaying the SD tape. Sub screen (59/60 Hz mode) 00 0000 BLANK : LINE 10&273 Forced blanking : 0001 THRU : 12 No blanking LINE 22&285 Sub screen (50 Hz mode) 00 LINE 7&320 : 0000 BLANK : Forced blanking 0001 THRU : No blanking 15 LINE 22&335 *1 Displayed menus may vary depending on the settings in menu No. 25 SYSTEM FREQ. For details, refer to "Menus which are displayed" (page 32). *DW: With SD output (SD tape playback or down-converted output) "_____" indicates the factory setting. 256 512 768 1023 z Gamma correction is effective in the following conditions. Š When the VTR operation mode is VV (TAPE) and 720p is displayed in the system format. However, during cross convert from 720p > 1080i, gamma correction is not effective for SD output. z When "ON" is selected, the GAMMA lamp on the front panel is on at all times. z When this unit is turned to OFF, this setting returns to "OFF." The setting of user default returns to "OFF." z This item is not effective for 1394 output. 50