Panasonic AJHD1400 AJHD1400 User Guide - Page 52

Setup menus (continued) AUDIO (continued) No./Item Description of setting 750 ANA CH1/2 SEL 759*1 DV PB ATT 760*1 REC PT MUTE 762 AUD RATE CON 765 CUE OUT SEL 781*1 IN IMP SEL For selecting the channel for the signal output to the analog audio output terminal CH1/CH2. 0000 CH1/2 0001 CH3/4 0002 CH5/6 0003 CH7/8 For selecting the audio output level during DV format playback. 0000 OFF : The audio output level is not attenuated. 0001 ON : The audio output level is attenuated. For selecting whether to mute the sound at the joins in the recording during DV or DVCAM format playback. 0000 OFF : The sound is not muted. 0001 ON : The sound is muted. For setting whether the tape is to be played back without passing the signals through the rate converter (without activating the digital filter) in the digital audio output unit. 0000 OFF : The tape is played back without passing the signals through the rate converter. 0001 ON : The signals are passed through the rate converter, and the tape is played back. ON/OFF control is exercised for channels 1 through 8 at the same time. Separate settings cannot be performed on a channel by channel basis. For setting whether to output the analog CUE signal to CH1/2 for the analog audio output. 0000 OFF : The analog CUE signal is not output. The PCM audio signal is output when the speed range is less than j1.0k to +1.0k; while the no audio signal is output at any other speed. 0001 ON : The analog CUE signal is output. The PCM audio signal is output when the speed range is less than j1.0k to +1.0k; while the analog CUE signal is output at any other speed. For setting the analog audio input impedance. 0000 600 : 600h 0001 HIGH : High impedance Regardless of this setting, the impedance is set to 3kh. when "-60 dB" is selected as the menu item No.701 to 702 settings. No./Item Description of setting 782 EMBD CH SEL Set the channels to multiplex SD-SDI output. 0000 CH1-4 : 0001 CH5-8 : When tape other than DVCPRO HD (LP) is played, CH1 to CH4 is always multiplexed. 783 AUDIO CH SEL 784 MONI SEL INH For selecting channels that are adjusted with the audio volume control on the front panel and displayed on the audio level meter. 0000 CH1-4 : Select CH1-CH4. 0001 CH5-8 : Select CH5-CH8. Select enabled/disabled for MONITOR SELECT button operation on the front panel. 0000 OFF : Operation is enabled. 0001 ON : Operation is disabled. 0002 ON1 : Operation is disabled in the FULL display mode while the operation is enabled only in the FINE display mode. *1 Displayed menus may vary depending on the settings in menu No. 25 SYSTEM FREQ. For details, refer to "Menus which are displayed" (page 32). "_____" indicates the factory setting. 52