Panasonic AJHD1400 AJHD1400 User Guide - Page 39
Formats for playback, BASIC continued, <Notes>
View all Panasonic AJHD1400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 39 highlights
Setup menus (continued) BASIC (continued) No./Item Description of setting 030*1 For setting the field frequency. HD 0000 59/23 : FREQUENCY The field frequency is set to 59.94/23.98 Hz. 0001 60/24 : The field frequency is set to 60/24 Hz. The field frequency which is set here takes effect only when there is no input which supports the OUT REF setting. If there is an input which supports the setting, the field frequency is consistent with the field frequency of input. 031*1 OUT REF For selecting the video output reference. 0000 AUTO : The REF signal (HD/SD) which is input to the REF connector is automatically identified and serves as the reference. If no signal is supplied to the REF connector, the HD serial input signal serves as the reference. If neither the REF input signal nor HD serial input signal is supplied, the unit's internal reference is used. 0001 INPUT : The input signal serves as the reference. If this signal is not available, the unit's internal reference is used. 0002 HD REF : The HD REF input signal serves as the reference. If this signal is not available, the unit's internal reference is used. 0003 SD REF : The SD REF input signal serves as the reference. If this signal is not available, the unit's internal reference is used. 0004 E-AUTO : When the editing mode is selected, the state is the same as when set to "INPUT." When any mode other than the editing mode is selected, the state is the same as when set to "AUTO." For details, refer to "Reference signals" (page 16). 032*1 REC REF Select the reference to synchronize the image frames for recording. 0000 NORMAL : The video signal which is input is automatically identified and serves as the reference. 0001 SLTC : The time code which is input to the HD SDI IN connector isidentified and serves as the reference. When the SLTC is selected, the following settings are necessary to validate the settings for this item. z Menu No. 25 SYSTEM FREQ: 59/60 z Menu No. 020 SYS FORMAT: 720p z INPUT SELECT button on the front panel: HDSDI Formats for playback Depending on how the menu item No.020 SYS FORMAT, No.022 PB FORMAT and No.023 FORMAL SEL settings are combined, the formats of the tapes played back by the unit differ as shown in the table below. 022. PB FORMAT MANUAL AUTO 020. 023. SYS FORMAT FORMAT SEL HD_LP HD_SP 50M 1080i 25M DV DVCAM HD_LP HD_SP 50M 720P 25M DV DVCAM If AUTO is selected as the menu item No.022 PB FORMAT setting, the format applying when the format is not yet detected (when the tape inserted) follows the menu item No.023 FORMAL SEL setting. However, if "DV" or "DVCAM" is selected, operation proceeds as if "HD_LP" is selected. Playback format DVCPRO HD-LP (1080i) DVCPRO HD (1080i) DVCPRO50 (422) DVCPRO (411) DV DVCAM DVCPRO HD-LP (720p) DVCPRO HD (720p) DVCPRO50 (422) DVCPRO (411) DV DVCAM DVCPRO HD-LP (1080i/720p), DVCPRO HD (1080i/ 720p), DVCPRO50 (422), DVCPRO (411), DVCPROP (420p), DC or DVCAM format is detected automatically. z When the tape is ejected, the format follows the one selected by menu item No.020 SYS FORMAT setting. z DVCPRO P playback is not possible. *1 Displayed menus may vary depending on the settings in menu No. 25 SYSTEM FREQ. For details, refer to "Menus which are displayed" (page 32). "_____" indicates the factory setting. 39