Panasonic AJHD1400 AJHD1400 User Guide - Page 56
Timecodes recorded by this product, Time code when power is not supplied, <Notes>
View all Panasonic AJHD1400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Time code/user bits (continued) Time code when power is not supplied Even if the power is not supplied, the time code generator operates for many hours (about 1 year) by using the backup feature. And the accuracy when power is not supplied is about ±30 seconds a month. z When the time code generator advances regardless of the operation mode, the backup function is enabled. When the TCG switch in the front panel is set to "PRESET" and the menu No. 504 RUN MODE is set to "FREE." When the TCG switch in the front panel is set to "EXT" and the external time code input set in menu No. 507 EXT TC SEL is disconnected from the connector on the rear panel. z When the settings in menu No. 25 SYSTEM FERQ are revised, the advanced data will be cleared. Timecodes recorded by this product TCG switch INT (REGEN/ PRESET) EXT Menu No. 507 EXT TC SEL --- EXT_L SLTC SVITC Selected video input signal Recorded timecode SBC area VAUX area 1394 HD SDI 1394 HD SDI 1394 HD SDI 1394 HD SDI Internal TCG value (Refer to the following table.) Timecode on IEEE1394 digital input (SBC area) Timecode from TIME CODE IN connector input*1 Timecode on IEEE1394 digital input (SBC area) SLTC on input video signal*2 Timecode on IEEE1394 digital input (SBC area) SVITC on input video signal*2 Timecode on IEEE1394 digital input (VAUX area) SVITC on input video signal*3 Timecode on IEEE1394 digital input (VAUX area) SVITC on input video signal*3 Timecode on IEEE1394 digital input (VAUX area) SVITC on input video signal*3 Timecode on IEEE1394 digital input (VAUX area) SVITC on input video signal*3 *1 The internal TCG value is used when the signal cannot be detected from the TIME CODE IN connector input. *2 The internal TCG value is used when the SLTC or SVITC cannot be detected on the input video signal. *3 Nothing is recorded if the SVITC cannot be detected on the input video signal. Menu Recorded timecode TCG switch No.503 TCG MODE REGEN SW PRESET REGEN/ PRESET*4 AUTO No.505 TCG REGEN TC&UB TC UB --- TC&UB TC UB No.506 REGEN MODE --- AS&IN ASSEM INSRT AS&IN ASSEM INSRT AS&IN ASSEM INSRT For continuous recording TC UB REGEN PRESET PRESET REGEN PRESET For assemble editing For frame-by-frame shooting*5 For insert editing (Time code selection) TC UB TC UB REGEN REGEN PRESET REGEN PRESET PRESET REGEN PRESET REGEN PRESET REGEN REGEN PRESET PRESET REGEN REGEN REGEN PRESET PRESET PRESET PRESET REGEN REGEN REGEN PRESET PRESET REGEN *4 When menu No. 503 TCG MODE is set to AUTO, the REGEN and PRESET selection of the TCG switch is disabled. *5 When menu No. 154 AUTO BACK is set to "OFF", scene-to-scene continuity will be a normal recording. 56