Panasonic AJHD1400 AJHD1400 User Guide - Page 51

Setup menus (continued) AUDIO No./Item Description of setting 701*1 CH1 IN LV 702*1 CH2 IN LV 706 CH1 OUT LV 707 CH2 OUT LV 710 MONIL OUT LV 711 MONIR OUT LV 712 MONI OUT 724*1 REC CH3/4 For setting the reference level of the analog audio input (CH1). 0000 4dB 0001 0dB 0002 -20dB 0003 -60dB For setting the reference level of the analog audio input (CH2). 0000 4dB 0001 0dB 0002 -20dB 0003 -60dB For setting the reference level of the analog audio output (CH1). 0000 4dB 0001 0dB 0002 -20dB For setting the reference level of the analog audio output (CH2). 0000 4dB 0001 0dB 0002 -20dB For setting the reference level of the analog audio output (Lch). 0000 4dB 0001 0dB 0002 -20dB For setting the reference level of the analog audio output (Rch). 0000 4dB 0001 0dB 0002 -20dB For selecting whether or not to enable the headphone volume control knob for the volume of an audio monitor output. 0000 UNITY : The signals are output at a fixed level. 0001 VAR : The signal output is coupled with the headphones volume control. This selects the input signal to be recorded on the audio CH3/4 track. 0000 CH1/2 : Audio input CH1/2 signal. 0001 MUTE : Mute z This item is effective for analog input only. z When selecting analog input, the same data as CH1 to CH4 is recorded in CH5 to CH8. No./Item Description of setting 730*1 REC CUE 731 PB FADE 732 EMBEDDED AUD 746 MONI CH SEL For setting the input signal to be recorded on the CUE track. 0001 CH1 : Audio input CH1 signal 0002 CH2 : Audio input CH2 signal 0003 CH3 : Audio input CH3 signal 0004 CH4 : Audio input CH4 signal 0005 CH5 : Audio input CH5 signal 0006 CH6 : Audio input CH6 signal 0007 CH7 : Audio input CH7 signal 0008 CH8 : Audio input CH8signal 0009 CH1+2 : Audio input CH1 + CH2 mixed signal 0010 CH3+4 : Audio input CH3 + CH4 mixed signal 0011 CH5+6 : Audio input CH5 + CH6 mixed signal 0012 CH7+8 : Audio input CH7 + CH8 mixed signal 0013 CH1~8 : Audio input CH1 through CH8 mixed signal z For analog input, this is interlocked to the settings in menu No. 724 REC CH3/4. z Audio signal is not recorded in the CUE track when inputting 1394. (Mute) For setting the processing for the audio edit points (IN point, OUT point) and followon recording point during playback. 0000 AUTO : The processing follows the status established during recording. 0001 CUT : Cut processing is forcibly performed. 0002 FADE : Fade processing is forcibly performed. For setting whether to superimpose audio data onto the HD SDI output and SD SDI output. 0000 OFF : The audio data is not superimposed. 0001 ON : The audio data is superimposed. For selecting the monitor output. 0000 MANU : The signal selected by the MONITOR SELECT button is output. 0001 AUTO : The PCM audio signal is output when the speed range is less than j1.0k to +1.0k; the CUE AUDIO signal is output at all other speeds. 0002 PCM : The PCM audio signal is output in the j32k to i32k speed range. When the L/R selection is CUE with the MONITOR SEL button on the front panel of this unit, CUE AUDIO is output at all speeds, regardless of the above menu. During playback of DV/DVCAM tapes, the operation uses a "MANU" setting regardless of the setting in this item. *1 Displayed menus may vary depending on the settings in menu No. 25 SYSTEM FREQ. For details, refer to "Menus which are displayed" (page 32). "_____" indicates the factory setting. 51