Panasonic AJHD1400 AJHD1400 User Guide - Page 38

Setup menus (continued) BASIC (continued) No./Item Description of setting 006 DISPLAY SEL 007 CHARA H-POS For setting what the information to be superimposed. 0000 TIME : Only the data is displayed. ("Data" refers to the CTL, TC or UB value selected by the COUNTER button.) 0001 T&STA : The data and operation status are displayed. 0002 T&S&M : The data, operation status and mode are displayed. 0003 T&RT : The data and REC TIME are displayed. 0004 T&YMD : The data and REC DATE (year/month/day) are displayed. 0005 T&MDY : The data and REC DATE (month/day/year) are displayed. 0006 T&DMY : The data and REC DATE (day/month/year) are displayed. 0007 T&UB : The data and user bits are displayed. The time code is displayed after the user bits when the COUNTER button is set to UB. 0008 T&CTL : The data and CTL are displayed. The time code is displayed after the CTL data when the COUNTER button is set to CTL. 0009 T&T : The data and time code are displayed. z Depending on the format used, the following displays appear for the modes. > DVCPRO HD-LP > DVCPRO_HD-LP DVCPRO HD > DVCPRO_HD DVCPRO50 > DVCPRO_50 DVCPRO > DVCPRO DV > DV DVCAM > DVCAM z When T&S&M is selected as the item setting, an error message is superimposed onto the display when a warning or error occurs. z REC TIME and REC DATE are displayed only during DV or DVCAM playback. The operation mode is displayed with the DVCPRO HD-LP, DVCPRO HD, DVCPRO50 or DVCPRO format. For setting the horizontal position at which the superimposed characters are to be displayed. 0000 0 : : 0006 6 : : 0037 37 Press the joystick and tilt up/down and right/left to set the character position. 008 CHARA V-POS For setting the vertical position at which the superimposed characters are to be displayed. 0000 0 : : 0023 23 : : 0032 32 Press the joystick and tilt up/down and right/left to set the character position. No./Item Description of setting 009 CHARA TYPE For setting the superimposed display and menu display type. 0000 WHITE : White characters are displayed on a black background. 0001 W/OUT : White characters with black edges are displayed. 020*1 For setting the format in which to record or play back SYS FORMAT the signals including the HD REF signals. 0000 1080i : 1080i mode 0001 720p : 720p mode 022 PB FORMAT For setting the format in which to play back the tape. 0000 MANUAL : The tape is played back in the format selected by the menu item No.020 SYS FORMAT and No.023 FORMAT SEL setting. 0001 AUTO : The tape is played back in the format selected by the format in which the tape was recorded. 023 For selecting the format when "MANUAL" is selected FORMAT SEL as the menu item No.022 PB FORMAT setting. 0000 HD_LP : The DVCPRO HD-LP format is selected, and the format follows the menu item No.020 SYS FORMAT setting. 0001 HD_SP : The DVCPRO HD format is selected, and the format follows the menu item No.020 SYS FORMAT setting. 0002 422 : The DVCPRO50 (422) format is selected. 0003 411 : The DVCPRO (411) format is selected. 0004 DV : The DV format is selected. 0005 DVCAM : The DVCAM format is selected. *1 Displayed menus may vary depending on the settings in menu No. 25 SYSTEM FREQ. For details, refer to "Menus which are displayed" (page 32). When the signal format to be output is set to other than DVCPRO HD and an external device is connected to the DV connector, the following settings are recommended. z Menu No. 022 PB FORMAT: MANUAL z Menu No. 023 FORMAT SEL: Format of the tape that is inserted in the unit "_____" indicates the factory setting. 38