Panasonic AV-HS410 Operating Instructions Advanced - Page 101
Setting the ancillary data and embedded audio data, When an SD format is used
![]() |
View all Panasonic AV-HS410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
2. Input/output signal settings 2-6. Setting the ancillary data and embedded audio data A function for allowing the V ancillary data and embedded audio data of the SDI input signals to pass through can be set. When an HD format is used: The ancillary data starting with line 9 is allowed to pass through. When an SD format is used: The ancillary data starting with line 12 is allowed to pass through. pp When 1080/59.94i, 720/59.94p, 1080/50i or 720/50p has been selected as the unit's system format setting, it is not possible to allow the ancillary data and embedded audio data to pass through even if SD format signals (480/59.94i or 576/50i) have been input in the Dot by Dot mode or Up Convert mode. Refer to "2-1-2. Setting the input mode". 1 Press the s button to light its indicator, and display the System menu. 2 Use [F1] to display the Ancillary sub menu. Setting for the output signals of the multi view display 5 Use [F5] to select "PGM", "PVW" or "Off" using the MV item. PGM PVW Off The ancillary data and embedded audio data of the SDI input materials selected by the PGM bus are allowed to pass through. The ancillary data and embedded audio data of the SDI input materials selected by the PST bus are allowed to pass through. The ancillary data and embedded audio data are not allowed to pass through. Setting for the output signals of the AUX buses (AUX1 to AUX4) 6 Use [F2] to select "On" or "Off" using the AUX item. On The ancillary data and embedded audio data of the SDI input materials selected by the AUX bus (AUX1 to AUX4) are allowed to pass through. Off The ancillary data and embedded audio data are not allowed to pass through. Setting for the program output signals 3 Use [F3] to select "On" or "Off" using the PGM item. On The ancillary data and embedded audio data of the SDI input materials selected by the PGM bus are allowed to pass through. Off The ancillary data and embedded audio data are not allowed to pass through. Setting for the preview output signals 4 Use [F4] to select "On" or "Off" using the PVW item. On The ancillary data and embedded audio data of the SDI input materials selected by the PST bus are allowed to pass through. Off The ancillary data and embedded audio data are not allowed to pass through. 101
![](/manual_guide/products/panasonic-avhs410-operating-instructions-advanced-cac59c1/101.png)