Panasonic AV-HS410 Operating Instructions Advanced - Page 65
Moving to the first frame or last frame, Trimming moving images, Operations performed using
View all Panasonic AV-HS410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 65 highlights
1. Basic operations Moving to the first frame or last frame 1 Press the v button to light its indicator, and display the Video Memory menu. 2 Use [F1] to display the Video Memory2 sub menu. Operations performed using the number keys : This function can be actuated in any model whose system version is V2.00.00 and up. These operations cannot be performed using the number keys with models whose system version is below V2.00.00. 3 When [F2] (LEAD) is pressed, the current position is moved to the first (head) frame; conversely, when [F3] (LAST) is pressed, the current position is moved to the last frame. ppWhen the [VMEM] button located on the right of the number keys is pressed and the video memory operation mode has been established, the operation of number keys 0 and . become linked. : This function can be actuated in any model whose system version is V2.00.00 and up. These operations cannot be performed using the number keys with models whose system version is below V2.00.00. Trimming moving images The position where the playback of the moving images is to start (IN point) and the position when it is to end (OUT point) can be set. 1 Press the [VMEM] button on the right of the number keys to establish the video memory operation mode. 2 Use the number keys to stop the moving images at the position where the images are to be trimmed (IN point or OUT point). 3 Trim the moving images by operating the buttons below. 9 Sets the trimming IN point. 6 Sets the trimming OUT point. C Releases the trimming settings. ppThe trimmed moving images are played back from the IN point to the OUT point, however you can move anywhere in the section from the start point to the end point of the recorded moving images by operating 1, 2, 0 and .. ppTrimming can be set and released over and over again until the moving images are stored on the memory card. ppWhen the moving images are saved on an memory card, only the trimmed parts are saved and the parts no longer required are deleted. 7 NEW STILL 1 8 COPY STILL 2 9 PASTE TRIM IN XPT DSBL REC 4 INS CLIP 1 5 DEL CLIP 2 6 MOD TRIM OUT �/+ PAGE STOP 1 2 3 < > REV TAKE < > REV ENTER 0/10 . C << >> UNDO << >> TRIM OFF PLAY MEMORY / WIPE PATTERN / 10 KEY MENU INPUT VMEM BKGD PATT KEY PATT 7 8 4 5 9 6 C 1 2 3 0 . T Selects Still1 as the operation target. Selects Still2 as the operation target. Selects Clip1 as the operation target. Selects Clip2 as the operation target. Sets the trimming IN point. Sets the trimming OUT point. Releases the trimming settings. Plays back the moving images one frame at a time in the reverse direction. Plays back the moving images one frame at a time in the forward direction. Sets the playback direction to reverse. (Button indicator lights: reverse direction; indicator off: forward direction) Transfers to the start frame of the moving images, and stops. Transfers to the end frame of the moving images, and stops. Plays back the moving images. X P Starts recording the moving images. Stops the recording or playback of the moving images. 65