Panasonic AV-HS410 Operating Instructions Advanced - Page 36

1. Basic operations 1-5-2. Selecting the DSK material Selecting the DSK fill signal and DSK source signal Press the [DSK] button in the AUX bus selection area to switch the selection of the DSK fill signal (indicator lights in amber) and DSK source signal (indicator lights in green). While the indicator of the [DSK] button is lit in amber, press one of the AUX bus crosspoint buttons 1 to 12 to select the DSK fill signal. The indicator of the selected AUX bus crosspoint button lights in amber. (It lights in red if the selected signal is being output from the PGM connector.) KEY PinP1 PinP2 DSK AUX1 AUX2 AMBER : FILL / GREEN : SOURCE AUX BUS DELEGATION AUX3 AUX4 AUX DISP MV PVW PGM AUX/DISP SOURCE SHIFT Lighting in amber 1-5-3. DSK transitions 1 Set the transition time. Press the t button to light its indicator, and display the Time menu. 2 Use [F1] to display the DSK sub menu. As with background transitions, set the transition time.  Refer to "1-1-6. Auto transition". 3 When the [DSK ON] button in the transition area is pressed, the DSK image is combined (fades in) for the length of the transition time that has been set. During fade-in, the [DSK ON] button blinks in red, and when the transition is completed, it lights in red. When the [DSK ON] button is pressed after fade-in is completed, the DSK image transitions (fades out). During fade-out, the [DSK ON] button lights in red, and when the transition (fade-out) is completed, it goes off. If the [DSK ON] button is pressed at any point during a transition, the direction of the transition is reversed. While the indicator of the [DSK] button is lit in green, press one of the AUX bus crosspoint buttons 1 to 12 to select the DSK source signal. The indicator of the selected AUX bus crosspoint button lights in green. (It lights in red if the selected signal is being output from the PGM connector.) Since the luminance key is operated as a self key, the key fill signals are used as the key source signals. When the luminance key has been selected as the downstream key type, the key signals will remain unchanged even when the key source signals are switched. KEY PinP1 PinP2 DSK AUX1 AUX2 AMBER : FILL / GREEN : SOURCE AUX BUS DELEGATION AUX3 AUX4 DISP AUX MV PVW PGM AUX/DISP SOURCE SHIFT Lighting in green 36