Panasonic AV-HS410 Operating Instructions Advanced - Page 57
Setting events using the menus, Registering marks, Setting the event duration, Use [F2] PAUSE item
![]() |
View all Panasonic AV-HS410 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
1. Basic operations Setting events using the menus Registering marks Marks can be registered and events inserted at the event points. ppPause ppClip playback ppGPI-Out output 1 Use 0, 1, 2 and . to select the event where the mark is to be registered or the event inserted. 2 Press the e button to display the Event Memory menu. 3 Use [F1] to display the Mark sub menu. Setting the event duration The lengths of the events can be set. 1 Use 0, 1, 2 and . to select the event to be modified. 2 Press the e button to display the Event Memory menu. 3 Use [F1] to display the Event Duration sub menu. 4 Use [F2] (minute item: minutes), [F3] (second item: seconds) and [F4] (frame item: frames) to set the event length. 5 Press [F5] to enter the duration. To cancel what has been modified, press the C button. 4 Use [F2] (PAUSE item), [F3] (CLIP item) or [F4] (GPI-Out item) to select the item. PAUSE CLIP GPI-Out When "On" is selected and the mark is registered in the event point, playback is paused at the mark position during event playback. "||" appears above the timeline. When "Clip1" or "Clip2" is selected and the mark is registered in the event point, the clip is played back at the mark position during event playback. " " appears above the timeline. When a GPI output port from "GPI-O1" to "GPI-O19" is selected and the mark is registered in the event point, pulse signals are output from the GPI Output port at the mark position during event playback. " " appears above the timeline. For the Config menu GPI-Out Port 1/5 sub menu to GPI-Out Port 5/5 sub menu Assign item, check that the selected GPI output port is set to "Event MEM". Setting the total duration The total length of all the events from start to end can be set. When the total duration is changed, the durations of the events contained in the event memories are re-calculated using the duration ratio prior to the change. However, the shortest duration of an event cannot be shorter than one frame. 1 Press the [EVENT MEM] button and light its indicator. 2 Press the [RECALL] button to light its indicator, and use the P button and number keys (1 to 10) to select the event memory to be modified. Refer to "1-10-3. Recalling the operations stored in the memory (Recall)". 3 Press the e button to display the Event Memory menu. 4 Use [F1] to display the Total Duration sub menu. 5 Press 6 to register the mark. In addition, press 4 to insert the event. To cancel the mark registration or event insertion, press the C button. 5 Use [F2] (minute item: minutes), [F3] (second item: seconds) and [F4] (frame item: frames) to set the event length. 6 Press [F5] to enter the duration. ppIf no more events can be contained in the total duration which already has many events and which has been changed, the number of frames will be forcibly adjusted. 57
![](/manual_guide/products/panasonic-avhs410-operating-instructions-advanced-cac59c1/57.png)