Panasonic HL-BD82S Operating Instructions - Page 11
Setting the Clock and Timer
View all Panasonic HL-BD82S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 11 highlights
ENGLISH Setting the Clock and Timer The time of day is displayed in hours and minutes. Always set the clock immediately after installation or after a power failure. Once power returns to the oven, the clock displays the time 12:00AM. The clock time will appear during all oven operations except when there is the timer or any timed cooking operations running. The oven is preset to a 12-hour clock and indicates AM and PM. See page 26 for how to switch to 24 hour display. To Set the Time of Day 1. Touch [TIME] until the display shows the "SET TIME". 2. Touch + [INC] or - [DEC] to set the desired time, the hours will begin flashing: continue until the correct hour value and AM or PM indication is selected. 3. Touch [TIME] again to confirm the hour and minutes will start flashing. 4. Touch + [INC] or - [DEC] to set the desired minutes value or hold the key to change by 10 minute steps. 5. Touch [TIME] again or wait for 5 seconds in order to confirm the time. Then "SET TIME" will disappear. NOTE: • The Time of Day can never be set if any time function is already set: first delete all the active time functions. • 10 minute steps : It will move in 1 minute steps after 50 minutes. (Same for other time settings) To Set the Timer This can be used as a timer when the Cooking Mode is OFF. 1. Touch [TIME] until the display shows the "TIMER". 2. Touch + [INC] or - [DEC] to set the desired timer value, the hours will begin flashing: continue until the desired value is set. 3. Touch [TIME] again to confirm the hour and minutes will start flashing. 4. Touch + [INC] or - [DEC] to set the desired minutes value or hold the key to change by 10 minute steps. 5. Touch [TIME] again or wait for 5 seconds in order to confirm the time. 6. "TIMER" will be steadily displayed and count down. 7. When the time ends, reminder beeps will sound until the [TIME] key is pressed. 8. Timer format is usually HR:MIN, switching into MIN: SEC during the last minute. 9. The displayed value is always rounded to the lower minute. 11