Panasonic WJHD200 WJHD200 User Guide - Page 21

SETUP PROCEDURES I Prior to Setup G Turning On the Power 1. Plug the power cord into the AC outlet. 2. Turn on the power switch on the rear panel. The operate LED lights up. An HDD check and a system check will be carried out while displaying respective messages. Power-on recording will start if TIMER has been set to EXT in the SYSTEM SETUP menu. 3. Press the [REC STOP] button to stop power-on recording, if applicable. POWER ON SIGNAL GND OFF OPERATE ALARM SUSPEND RESET 4. Hold down the buttons of [LOCK] and [RESET] simultaneously to suspend alarm inputs. The SUSPEND indicator will light up. This will prevent your setting operations from being interrupted by alarm inputs. OPERATE ALARM TIMER SUSPEND REMOTE RESET LOCK DST SP MU OSD SEQUE G Turning Off the Power 1. Press the [STOP] button when playing back, or [REC STOP] button when recording. Confirm that the HDD access indicator has turned off. 2. Turn off the power switch on the rear panel. The operate LED goes off. HDD STOP PLAY REC SETUP /ESC FULL ALARM SERCH ERROR PLAY MODE SELECT REC STOP PUSH- PAUSE SET TIME&DATE SEARCH ALARM RECALL Digital Disk Recorder WJ-HD200 Confirm that the HDD access indicator is off. HDD STOP PLAY REC SETUP /ESC FULL ALARM SERCH ERROR PLAY MODE SELECT REC STOP TIME&DATE SEARCH AL RE POWER ON SIGNAL GND OFF Note: Refer to Power-on Procedures in the Appendix for details. Notes: • Do not turn off the power while the HDD access indicator is on. • Do not leave the recorder turned off for a long time. Supply AC power to the unit and turn it on to charge up the backup battery. 21