Panasonic WJHD200 WJHD200 User Guide - Page 39

G IP Address (IP ADDR) The default is "192.168.000.010". G Netmask (NETMASK) The default is "255.255.255.000". G Gateway (GATEWAY) The default is "192.168.000.001". G Sequence Setup (SEQUENCE SETUP) SEQUENCE SETUP MULTI SEQ SETUPO SEQUENCE TIMING INT AUTO SKIP ON SPOT SEQ SETUPO SEQUENCE TIMING INT AUTO SKIP ON I Switcher Setup (SWITCHER SETUP) SWITCHER SETUP START DISPLAY QUAD-4A MULTI SEL MODE ALL SEQUENCE SETUPO CAMERA VIEW SETUPO Video switcher functions are programmed in this menu setup. G Start Display (START DISPLAY) The image in the selected form will be displayed on the monitor when the recorder is turned on. Single image: CH 1 to CH 8 Quad image: QUAD-4A (including 1-4), QUAD-4B (including 5-8) Multi image: 9SCREEN (including 1-8) Sequence: SPOT SEQ, MULTI SEQ G Multiscreen Selection (MULTI SEL MODE) When pressing the [MULTI SCREEN SEL] button on the front panel, the monitor display will change as follows depending on the setup. QUAD ONLY: QUAD-4A → QUAD-4B → QUAD-4A ALL: QUAD-4A → QUAD-4B → 9SCREEN → QUAD-4A 1. Move the cursor to SEQ SETUP in the SWITCHER SETUP menu, and press the JogDial. The SEQUENCE SETUP menu opens. 2. Select either MULTI SEQ SETUP or SPOT SEQ SETUP with the [D] or [C] button, and press the JogDial. The selected menu opens. G Multiscreen Sequence Setup (MULTI SEQ SETUP) Open the QUAD SEQ SETUP menu to program the sequence steps for displaying quad-split and single input images. MULTI SEQ SETUP STEP CAM 1 → QUAD-4A 2 → QUAD-4B 3 → - 4 → - 5 → - 6 → - 7 → - 8 → - SEC 2S 2S 2S 2S 2S 2S 2S 2S 1. Move the cursor to the desired step using the [D] or [C] button. 2. Select a camera number with the JogDial, and press the JogDial. The default camera number is identical to the step number. Available cameras: From 1 to 8 individually, 4A(1-4), or 4B(5-8) Note: The recorder will skip any step assigned "-". 3. Select the duration for the step with the JogDial, and press the JogDial. Available durations: 2-30S 39