Panasonic WJHD200 WJHD200 User Guide - Page 30

G Disk Capacity Warning (HDD FULL) The recorder monitors the disk capacity to warn the operator that the available capacity is nearing its end when STOP is selected for DISK END MODE. There are two warning levels. First, the FULL indicator on the front panel blinks when the remaining capacity has reached the preset value. Finally, the buzzer beeps when the disk is full, provided that the DISK END BUZZER parameter in the SYSTEM SETUP is set to ON. At the same time, the FULL indicator turns on. DISPLAY SETUP CLOCK→ JUN30.03 15:05 TIME&DATE TYPE1 24H TIME&DATE DISP.ON TIME&DATE POSI.R-LOWER STATUS DISP. ON STATUS POSI. R-LOWER HDD FULL 1% REMOTE LED ON HDD CHECK 0:00 CAMERA TITLEO 2. Press the JogDial (SET) to validate the selection. 3. Press the [D] or [C] button to select the next item, or press the [SETUP/ESC] button to quit the display setup. G Disk Check (HDD CHECK) S.M.A.R.T. (Self-Monitoring Analysis and Reporting Technology) is activated or deactivated for HDD check. DISPLAY SETUP CLOCK→ JUN30.03 15:05 TIME&DATE TYPE1 24H TIME&DATE DISP.ON TIME&DATE POSI.R-LOWER STATUS DISP. ON STATUS POSI. R-LOWER HDD FULL 1% REMOTE LED ON HDD CHECK 0:00 CAMERA TITLEO 1. Select the desired value with the JogDial. The default is 1 %. 1% - 99%: The FULL indicator blinks when the remaining capacity reaches the selected value. 2. Press the JogDial (SET) to validate the selection. 3. Press the [D] or [C] button to select the next item, or press the [SETUP/ESC] button to quit the display setup. G Remote LED (REMOTE LED) The remote LED on the front panel will indicate or ignore the remote controlled status of the recorder via the network. DISPLAY SETUP CLOCK→ JUN30.03 15:05 TIME&DATE TYPE1 24H TIME&DATE DISP.ON TIME&DATE POSI.R-LOWER STATUS DISP. ON STATUS POSI. R-LOWER HDD FULL 1% REMOTE LED ON HDD CHECK 0:00 CAMERA TITLEO 1. Select either ON or OFF with the JogDial. The default is OFF. ON: REMOTE LED turns on when the network controls the recorder. OFF: REMOTE LED is deactivated. 30 1. Select either ON or OFF with the JogDial. The default is OFF. ON 0:00-23:00: The recorder checks the HDD at the specified time every day. OFF: Check is deactivated. 2. Press the JogDial (SET) to validate the selection. 3. Press the [D] or [C] button to select the next item, or press the [SETUP/ESC] button to quit the display setup. Note: Recording will resume after a one-second intermission when HDD is checked. G Camera Title (CAMERA TITLE) Camera title and display position are specified for each camera. CAMERA TITLE CAM TITLE POSI. 1 OFF 2 ON→ 2¥¥¥¥ R-LOWER 3 ON→ 3¥¥¥¥ L-LOWER 4 OFF 5 OFF 6 OFF 7 OFF 8 OFF 1. In the DISPLAY SETUP menu, move the cursor to CAMERA TITLEO, and press the JogDial to open the CAMERA TITLE menu. 2. Move the cursor to the camera you wish to program using the [D] or [C] button.