Panasonic WJHD200 WJHD200 User Guide - Page 62
Disk End Buzzer DISK END BUZZER, Disk End Mode DISK END MODE
View all Panasonic WJHD200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
8 Password Operation (PASSWORD OPERATION) Enter a five-digit password to protect normal operations from unauthorized access. Available numerals: From 11111 to 88888 8 Keylock Buzzer (KEYLOCK BUZZER) The buzzer will beep or not when a locked button is pressed. ON: Enables the buzzer beep. OFF: Disables the buzzer beep. 8 Skip Alarm Recall (SKIP ALARM RECALL) Specify the number of pages to be skipped in the alarm log. The alarm log page will jump the specified pages when the JogDial is rotated. Available skip pages: 1, 5, 10, 20, 50 8 Play Priority (PLAY PRIORITY) This setting places priority on a specific access point for playing back the image data when access collisions take place. LOCAL: Places priority on front panel operations. NET PLAY: Places priority on network access. FTP GET: Places priority on access to the FTP. NONE: The latest operation has priority over others. 8 Time Adjusting (TIME ADJUSTING) The internal timer built into the WJ-HD200 is calibrated once a day via the Time Adjust In and Out terminals on the rear panel. SLAVE: Accepts the calibration signal from the master. MASTER: Supplies the calibration signal to the slave units at the specified hour every day. 8 Simultaneous Recording and Playback (SIMULTANEOUS REC&PLAY) There may be cases where recording is essential while playback is in progress. ON: Allows both recording and playback at a time. OFF: Allows exclusively recording or playback. Note: The recording rate may be sacrificed in the following cases. • Recording and playback/FTP access are carried out simultaneously. • A multi-split screen is displayed. • VMD (video motion detection) is enabled. • A PC accesses the live images via the network. 8 Alteration Detection (ALTER DETECT) You can enable or disable the addition of alterationdetection signals in the JPEG data supplied to the network. The default is OFF. ON: Detects alterations. OFF: Does not detect. Note: When set to ON, the data transmission rate on the network will slow down. 8 Disk End Mode (DISK END MODE) STOP: Stops recording until a mode other than [STOP] is selected. CONTINUE: Old data is automatically overwritten from the disk start. 8 Disk End Buzzer (DISK END BUZZER) ON: Enables the buzzer beep at the disk end (remaining space = 0 %). OFF: Disables the buzzer beep. 62