Panasonic WJHD200 WJHD200 User Guide - Page 43
Viewing a Single Live Sequence, Viewing a Multiscreen Live Images, Pressing the JogDial, Notes
View all Panasonic WJHD200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 43 highlights
3. Rotate the JogDial to move the zoomed area to the right and left, or press the [D] or [C] button to move the area up or down. 4. Press the JogDial repeatedly to select an appropriate enlargement ratio. Pressing the JogDial : Increases the ratio (x2 → x4) 5. Hold down the [ZOOM] button for 2 seconds to cancel the zoom mode. G Viewing a Single Live Sequence The multiscreen monitor and spot monitor can display a single live sequence. A series of input images is displayed in succession on the monitor. One sequence can be programmed in the menu setup with the input assignment and display duration for each step. 1. Select the multiscreen monitor. 2. Switch the monitor display to a single live. 3. Press the [SEQUENCE] button to run the sequence. The LED in the [SEQUENCE] button lights up. SEQUENCE 1 2 8 3 G Viewing a Multiscreen Live Images The multiscreen monitor can display multiscreen live images. The available split patterns are: Quad A (input 1, 2, 3, 4), Quad B (input 5, 6, 7, 8), and 9-split (input 1-8). 1. Press the [MULTI SCREEN SELECT] button repeatedly. The pattern changes every time the button is pressed depending on the setup for MULTI SEQ SETUP. When ALL is selected: Pattern 4A → Pattern 4B → Pattern 9 → Pattern 4A MULTISCREEN SELECT (4A) 12 34 MULTISCREEN SELECT (4B) 56 78 9 divisions d'image 123 456 78 MULTISCREEN SELECT When QUAD ONLY is selected: Pattern 4A → Pattern 4B → Pattern 4A MULTISCREEN SELECT (4A) 12 34 MULTISCREEN SELECT (4B) 56 78 While running, the LED of the input image presently displayed on the monitor will illuminate in the corresponding numeric button. 4. During the sequence, press the [SEQUENCE] button to pause. The LED in the [SEQUENCE] button blinks. SEQUENCE 5. Press the [SEQUENCE] button to restart the sequence. The LED turns to a steady light. 6. Press any of the numeric buttons to quit the sequence and return to spot monitoring. Note: The Auto Skip function can be programmed in the menu setup to be applied to the sequence to skip any steps where no video signal is present. G Viewing a Quad Live Sequence A series of quad images is displayed in succession on the monitor. One sequence can be programmed in the menu setup with the display duration for each step. 1. Select the multiscreen monitor. 2. Change the monitor display to the multiscreen live mode. 3. Press the [SEQUENCE] button to run the sequence. The LED in the [SEQUENCE] button lights up. SEQUENCE Notes: • When the single live mode is activated during the sequence, both the multiscreen monitor and spot monitor can be switched to the single live image. • During the sequence, the LEDs of the [CAMERA SELECT] buttons light up corresponding to the selected cameras that send images to the monitor. 43