Panasonic WJHD200 WJHD200 User Guide - Page 50

4. Press the [PLAY] button to play back the searched record. 5. Press the [STOP] button to stop playback. Note: "Alarm Search Playback" and "Alarm Log Recall" are similar, but different in operations. Refer to I Alarm Log Recall & Search on page 46. 6. Repeat from step 1 to search for another time and date or press the [TIME&DATE SEARCH] button to cancel the function. Pressing the [STOP] button will also end the searching. Note: Searching may take the recorder 18 seconds at worst I Time & Date Search Playback A picture record of a specified time and date is played back. 5 PLAY REC REC STOP PUSH- PAUSE SET TIME&DATE SEARCH ALARM RECALL 2 1 3 JAN31.03 23:00:00 TO SEARCH PUSH PLAY KEY 1. Press the [TIME&DATE SEARCH] button. The LED in the button lights up. The monitor displays the time & date search window. 2. Press the [D] or [C] button to move the cursor to the next position. 3. Rotate the JogDial clockwise to increase the parameter or counter-clockwise to decrease it. 4. Repeat steps 2 and 3 above until the desired parameters are selected. 5. Press the [PLAY] button to start playback. The monitor displays the single spot image when an input is selected or the nine-split image when all input is specified. The recorder stops searching when the playback reaches the end of the record. I Multiscreen Playback You can view a multiple playback image displayed in 4-split or 9-split pattern on the monitor at a time. HDD STOP PLAY REC SETUP /ESC MULTI SCREEN FULL SELECT ALARM SERCH ERROR ZOOM PLAY MODE SELECT • Normal Playback Press the [PLAY] button to start normal playback. The image data recorded on the disk are sequentially played back, and the monitor displays images in the single display mode or multiscreen display mode. • Multiscreen Playback Press the [MULTI SCREEN SELECT] button an appropriate number of times. The monitor display changes as follows. The LED's in the [MULTI SCREEN SELECT] button and respective input buttons will light up. Single Image → Quad A (4A/comprising inputs 1, 2, 3, and 4) → Quad B (4B/inputs 5, 6, 7, and 8) → Nine-spit (inputs 1 - 8) → Quad A → Quad B → Nine-split • Specific Input Playback Press the respective input button. The images of the selected input are played back continuously and displayed on the monitor. • Stop Playback Press the [STOP] button to stop playback. Note: When the playback proceeds to where recording is executed on the disk, the recorder will pause playback and freeze the displayed image on the monitor. 50