Panasonic WJHD200 WJHD200 User Guide - Page 34
Time Adjust Setup, TIME ADJUSTING, Auto Erasing Setup, AUTO ERASING, MASTER, SLAVE, The hours
![]() |
View all Panasonic WJHD200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 34 highlights
G Time Adjust Setup (TIME ADJUSTING) IN and OUT terminals for a calibration signal are provided on the rear panel. The master unit supplies the calibration signal to the slave units once at the specified hour everyday. The slave unit accepts the signal through the IN terminal, and corrects its internal timer to the hour as far as the clock deviates within 15 minutes after or before the hour. This is convenient for synchronizing the internal clock with other connected devices. TIME ADJUST SETUP TIME ADJUSTING SLAVE SET TIME→ 9:00 G Auto Erasing Setup (AUTO ERASING) The redundant records on the disk can be erased every day at 24:00 midnight. The number of days specified by this setting stand for the number of days the records will be protected from the present, while the records older than that will be erased. SYSTEM SETUP (2 OF 2) PLAY PRIORITY LOCAL TIME ADJUST SETUPO AUTO ERASING OFF 1. Move the cursor to TIME ADJUST SETUPO in the SYSTEM SETUP with the [D] or [C] button, and press the JogDial. The TIME ADJUST SETUP menu appears. 2. Select either MASTER or SLAVE with the JogDial, and press the JogDial. The default is SLAVE. MASTER: The recorder supplies the calibration OUT signal to the slave units. SLAVE: The internal timer of the recorder is supplied the calibration signal from the master. 3. Select the hour with the JogDial, and press the JogDial. The hours: From 00:00 to 23:00 Note: You need not set the hour when SLAVE is selected. 4. Press the [SETUP/ESC] button to go back to the SYSTEM SETUP menu. 1. Move the cursor to AUTO ERASING with the [D] or [C] button. 2. Select the desired number of days with the JogDial, and press the JogDial. OFF: Auto erasing is not applied. 1 DAY: Only today's records from 00:00 onward are protected. Records before 24:00 yesterday are erased. 2 to 10DAYS: Records before the specified number of days are erased. 14, 30, 45, 60, 90, 120, 150, 180DAYS: Same as above. Notes: • The number of days include today as 1 day, therefore 2DAYS covers today and yesterday. • Auto erasing is implemented at 24:00 midnight. Playback will stop once when the time reaches 24:00, then will restart with a different portion based on the renewed day count. 34
![](/manual_guide/products/panasonic-wjhd200-wjhd200-user-guide-d198673/34.png)